VOD705
POWE
R
EJE CT
REW
PLAY
F.F
STOP
PROVD8
AUTO
PROGRAM
SOURCE PIC TURE
SELECT SELECT
CHANNEL
VOLUME
O
N
O
F
F
AU TO
8” LCD OVERHEAD
TV/MONITOR WITH
DVD PLAYER
®
128-6392
ELECTRONICS CORP.
Released 06-14-02.
Features
Congratulations on your purchase of the Audiovox
PROVD8 Overhead TV/Monitor with DVD Player. The
PROVD8 has been designed to give you and your family
many years of video entertainment in the mobile
environment. Please read the directions that follow to
familiarize yourself with the product and to ensure that
you obtain the best results from your equipment.
Please NOTE: Installation options vary, see the
individual owner’s manuals for each component in your
system to obtain a full understanding of each
component’s operation.
·
8 Inch (4:3) TFT (Thin Film Transistor) Active
Matrix LCD (Liquid Crystal Display) Monitor
Built-in DVD Player
·
·
Built-in TV Tuner
·
·
AVI Input
AUX (Game/Camcorder) Input
·
·
·
OSD (On Screen Display) for Control of Picture
Quality and Functions
Three Frequency FM Modulator (remote
control) with OSD for Frequency Display
Infrared Transmitter for IR Wireless
Headphones
Safety Precaution
For safety reasons, when changing video media it is
recommended that the vehicle is not in motion, and that
you do not allow children to unfasten seat-belts to
change video media or make any adjustments to the
system. System adjustments can be accomplished
using the remote control unit, while seat-belts remain
fastened. Enjoy your Audiovox entertainment system
but remember-safety of all passengers remains the
number one priority.
·
·
·
·
·
·
Headphone / Speaker Amplifier
Headphone Jacks (DVD/TV/Monitor)
Forward and Side Remote Sensor
Dome Lights with Switch
Backlit Controls for Low Light Operation
Full Function Remote Control
Controls and Indicators Diagram
1
2
3
11
12
13
4
P
O
W
E
R
E
J
E
C
T
R
E
W
P
L
AY
F.F
S
T
O
P
25
5
7
6
14
16
A
U
T
O
P
S
IC
E
T
L
U
E
R
C
E
T
S
S
O
E
U
L
R
E
C
C
E
T
P
R
O
G
R
A
M
15
C
H
A
N
N
E
L
V
O
L
U
M
E
8
17
O
N
O
F
F
A
U
T
O
9
10
18
19
20
24
21
22
23
Figu re 1
-1-
Main Function Descriptions
1. DVD Disc Insertion Slot
8. VOLUME UP (+) Button
Use this button to raise the volume level of the
headphone jacks. It is also used to make picture
adjustments in picture select mode.
NOTE: These buttons will not affect the volume of
wireless headphones or the wired RF modulator.
When using these devices the volume must be
adjusted with the wireless headphone volume
control or with your radio’s volume control (see page
10, Wireless Headphones, or page 11, Wired FM
Modulator).
2. Infrared Transmitter and Sensor
Use to transmit audio to wireless headphones. Also
allows the remote control to operate the PROVD8
and to control other accessories in the system
3. PLAY (u) Button
This button is used to enter the play mode.
4. FWD (uu)
Allows the user to search in a forward direction
at 2,4, and 8 times the normal speed.
5. STOP ( ) Button
9. Three Position Dome Light Switch
· Auto – Automatically switches on the dome
lights in conjunction with the vehicle’s interior
illumination.
· Off – The dome lights will not turn on in this
position.
· On – Turns on the dome lights.
10. Screen Release
Moves in direction of the arrow to release the drop
down screen.
11. Rev (tt)
Allows the user to search in a backwards direction.
12. Eject ( ) Button
6. PICTURE SELECT Button
Each time this button is pressed, the on screen picture
adjustment display cycles through “adjustment bars”
for BRIGHTNESS, CONTRAST, COLOR and TINT.
Once the desired adjustment bar is displayed, use
the VOLUME UP/DOWN buttons to adjust the setting.
The display will automatically turn off if no adjustments
are made within 6 seconds, or if any other button is
depressed.
7. VOLUME DOWN (-) Button
Use this button to decrease the volume level of the
headphone jacks. It is also used to make picture
adjustments in picture select mode.
Ejects Disc.
-2-
13. Power Button
(Bright red when system is on, dim when off).
14. Source Select
(DVD, TV, AV1, AUX).
15. TV Auto-program
Allows the user to scan and program active TV stations
into memory.
16. Channel Up (p) Button
Use this button to increase the channel number to the
desired channel.
17. Channel Up (q) Button
Use this button to decrease the channel number to
the desired channel.
18. Dome Lights
provide additional interior illumination.
19. Drop Down LCD Panel.
20. Auxiliary Audio Input (Right).
21. Auxiliary Audio Input (Left).
22. Auxiliary Video Input.
23. Side Remote Sensor Eye
Allows the remote control to operate the PROVD8 and
control the other accessories.
24. Headphone Jacks
Allows the use of wired headphones with a 1/8” plug
for listening to video program audio.
25. PROVD8 Ventilation Opening
NOTE: Audiovox recommends the use of the Audiovox
HP275 Headphones when using wired headphones.
-3-
REMOTE CONTROL OPERATION
EJECT
POWER
FM TRANSMITTER
ON/OFF
SELECT
17
20
1
18
SOURCE
19
BATTERY INSTALLATION
2
AUTO
MEMORY
3
SKIP/
SEARCH
Before attempting to operate your Remote Control,
install the batteries as described below.
4
ERASE/
WRITE
VOL
21
5
6
22
24
CH
MUTE
PIX
1) Turn the Remote Control face down. Using a
fingernail, lift the battery cover off.
23
25
7
8
9
Enter
2) Install two “AAA” batteries as shown. Make
sure that proper polarity (+ or -) is observed.
3) Align the cover tabs with the remote control
and press down until the cover clicks.
SETUP
MENU
10
CH
26
A-B
11
27
REPEAT
RETURN
28
30
12
29
31
The remote control will operate the PROVD8 and
Audiovox VCP’s. It is not a universal remote control
and will not control equipment from other
manufacturers.
13
14
32
34
15
33
16
-4-
DVD Remote Function Descriptions
1. DVD POWER ON/OFF Button*
4. SKIP / SEARCH
This button selects between SKIP and SEARCH
modes. In “SKIP mode” the TV tuner will tune and
stop on channels that are programmed into memory
when the CHANNEL UP/DOWN buttons are used.
When the SKIP mode is disabled, the TV will stop
on all active channels.
Press this button to turn the PROVD8 on. The
DVD or selected video source will be displayed
on screen and the picture will appear in a few
seconds. Press the button again to turn the
PROVD8 off.
2. SOURCE Button
5. ERASE / WRITE
Video equipment connected to the AUDIO/
VIDEO inputs can be selected and displayed on
the LCD display screen by pressing this button.
Each time the button is pressed, the Audio /
Video source will change in the following
sequence: DVD, TV, AV1 and AUX.
While tuned to a channel, pressing this button will
store or erase the channel from memory. The stored
channel numbers are displayed in “GREEN” on the
LCD display screen, and the non-stored channel
numbers are in “RED”.
6. Channel Up (p) Button
3. AUTO MEMORY
Use this button to increase the channel number to the
desired channel and to scroll upward in menu
options.
When the AUTO MEMORY button is pressed,
all channels are searched and channels that are
detected with signals of sufficient levels are
automatically stored. Please refer to page 3 for
more information on TV reception.
7. MUTE Button
Press this button to mute the audio while using wired
headphones.
Pressing the button again restores sound to the
previously set level.
8. ENTER Button
Used to select or switch a highlighted selection.
*Function control is available on the unit and the remote control.
-5-
18. FM Transmitter Frequency Select Button
(Selects 88.3MHz, 88.7MHz, 89.1MHz).
19. FM Transmitter On/Off Button.
Used to turn the FM Modulator on and off.
20. NUMBERS Buttons
9. LEFT (t) Button
Allows the user to shift left in the menu options.
10. MENU Button
Allows the user to access the main menu.
11. RETURN Button
Allows the user to enter the numbers 0 to 9 for selection
of CD tracks, password and chapters.
Allows the user to exit the set up menu.
12. TV Mode Select
Switches certain function keys on the remote control
for TV functions.
13. DISPLAY
Display Menu, This includes Title,Chapter,Time,
Audio, Subtitle, Angle, Repeat, and Bookmark.
14. PAUSE Button ( )
II
21. VOLUME DOWN (-) Button
Use this button to decrease the volume level of the
headphone jacks. It is also used to make picture
adjustments in picture select mode.
22. VOLUME UP (+) Button
Use this button to raise the volume level of the
headphone jacks. It is also used to make picture
adjustments in picture select mode.
NOTE: These buttons will not affect the volume of
wireless headphones or a wired RF modulator. When
using these devices the volume must be adjusted
with the wireless headphone volume control or with
your radio’s volume control (see page 10, Wireless
Headphones, or page 11, Wired FM Modulator).
DVD disc play will be paused. During Disc
Playback, momentarily press the PLAY Button to
Pause the Disc from the unit.
15. PREVIOUS (ltt)
Selects the previous chapter or track on a disc.
16. NEXT (uul)
Selects the next chapter or track on a disc.
▲
17. EJECT( ) Button *
The disc will be ejected disc from disc mechanism.
*Function control is available on the unit and the remote control.
-6-
28. A-B REPEAT Button
23. PICTURE SELECT Button
Allows the user to repeat play of a DVD, CD or MP3
from point A to point B.
29. VCP Mode Select Button
Switches certain function keys on the remote control
for VCP functions.
30. DVD Mode Select Button
Switches certain function keys on the remote control
for DVD functions.
31. STOP (n) Button
DVD disc play will be stopped.
32. PLAY Button ( u)Button*
Press this button to activate the play mode while
a disc is loaded into the disc compartment.
33. Scan Forward (uu) Button
Allows the user to search in a forward direction at
2,4, and 8 times the normal speed.
34. Scan Backward (tt) Button
Allows the user to search in a backward direction
Each time this button is pressed, the on screen
picture adjustment display cycles through
“adjustment bars” for BRIGHTNESS, CONTRAST,
COLOR and TINT. Once the desired adjustment
bar is displayed, use the VOLUME UP/DOWN
buttons to adjust the setting. The display will
automatically turn off if no adjustments are made
within 6 seconds, or if any other button is
depressed.
24. RIGHT ( ) Button
Allows the user to shift to the right in the menu
options.
25. SETUP Button
Allows the user to select the DVD options
(Language, Video, Audio, Rating, Exit) Press
SETUP to activate this function. When finished
press SETUP to exit the Setup Menu.
26. CHANNEL DOWN (▲) Button
Allows the user to scroll downward in the menu
options.
at 2, 4, and 8 times the normal speed.
27. REPEAT Button
Allows the user to repeat various portions of a
DVD, CD or MP3 and displays the repeat menu
(Chapter, Title, Disc, Off).
*Function control is available on the unit and the remote control.
-7-
Turning the PROVD8 On or Off
CHANNEL TUNING SET UP
In order to easily access all available TV channels, it
may be necessary to perform channel auto-programming
whenever the vehicle’s geographic location has changed,
i.e. city to city, weak signal area.
1. Sliding the screen release lock forward will unlock
the LCD screen and it will drop down slightly. Pivot
the screen downward until a comfortable viewing
angle is reached. The internal friction will hold the
screen in position while the system is in use.
2. Pressing the power button on the unit or the remote
control will turn the system on or off alternately. When
in use the internal backlighting will illuminate the
controls.
3. After the unit has been turned on and is displaying a
picture, adjust the viewing angle, by pivoting the screen
to optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to
the locked position when not in use.
Use the Source Select Button on the Remote Control to
select TV mode.
1. Press the AUTO MEMORY button on the Remote
Control Unit or the AUTO PROGRAM button on the
drop down video unit. You will see the TV cycle
through all its channels. The built-in micro-processor
will automatically store each channel that is actively
broadcasting in your area.
2. (A) To tune only strong clear channels with the
CHANNEL UP/DOWN buttons, press the SKIP/
SEARCH button on the Remote Control Unit until
“SKIP MODE ON” is displayed on the bottom of the
screen. The TV will now tune only to strong active
channels when the UP or DOWN buttons are used
on the monitor or remote control.
3. (B) To tune weak or marginal channels with the
CHANNEL UP/DOWN buttons , press the SKIP/
SEARCH button on the Remote Control Unit until
“SKIP MODE OFF” is displayed on the bottom of the
screen. Tune to the desired channel using the
CHANNEL UP/DOWN buttons or go directly to the
channel by using the 0-9 buttons on the Remote
Control.
-8-
4. To ERASE a channel, press the ERASE/WRITE
button on the Remote Control Unit until “MANUAL
MEMORY XX ERASE” is displayed on screen. To
STORE a channel, press the button until the
MANUAL MEMORY XX ADD is displayed on screen.
Overhead Dome Lights
Operation
The Dome lights integrated into the PROVD8 are
controlled by a three position slide switch. Sliding the
switch to the on position will turn the lights on. The off
position will prevent the lights from turning on at all
times, and the auto position will allow the lights to turn
on and off with the vehicle’s interior lighting. Do not leave
the vehicle unattended with the dome light switch in the
on position, as this could result in a discharged battery.
P
O
W
E
R
E
J
EC
T
R
E
W
P
L
AY
F.
F
S
T
O
P
A
U
G
T
R
O
A
P
S
I
C
E
T
L
U
E
R
E
S
S
O
E
U
L
R
E
C
C
E
T
Dome light switch
P
R
O
M
C
T
C
H
A
N
N
E
L
V
O
L
U
M
E
O
N
O
F
F
A
U
T
O
-9-
Accessories
Wireless Headphones
Remote Sensor
The PROVD8 incorporates Infrared sensors which
relay signals from the remote control to allow the unit
to be controlled simply by pointing its remote control at
the remote sensor eye. The repeater function allows
control of auxiliary equipment such as an Audiovox
Video Cassette Player. The infrared sensor can relay
signals from most manufacturer’s remote controls to
its respective component connected to the Video input.
In this case you must use the remote control supplied
with the component.
The PROVD8 includes a built-in infrared transmitter
for use with Audiovox wireless headphones (Part
Number MVIRHS). The volume can then be adjusted
using the controls on each headset. The wireless
headphones must be used within a line of sight from
the transmitter, as infrared transmissions, like visible
light travel only in a straight line. See the
documentation accompanying your Audiovox wireless
headphones.
Wireless Headset Special Features
Remote
Sensor Eye
& Infrared
lAutomatic Level Control prevents input
signal over loading.
P
O
W
E
R
E
J
E
C
T
R
E
W
P
L
A
Y
F
.
F
S
T
O
P
Transmitter
A
U
G
T
R
O
A
P
S
I
C
E
T
L
U
E
R
E
S
S
O
E
U
L
R
E
C
C
E
T
P
R
O
M
C
T
C
H
A
N
N
E
L
V
O
L
U
M
E
O
N
O
F
F
A
U
T
O
lUses high frequency infrared light to assure
a clean signal for clear reception.
Remote
Sensor
Eye
-10-
Wired Headphones
AV1
There are two 1/8” headphone jacks on the PROVD8
that can be used with any standard wired stereo
headphones. These jacks are controlled by the volume
up / down buttons on the PROVD8 remote control.
Remove the protective plastic cover to access the
jacks. Remember to replace the cover when the jacks
are not in use.
The AV1 input may be connected to a Video Cassette
Player (VCP), video game system, or other audio / video
device. To access the AV1 input, turn the PROVD8 on
and press the source button on the PROVD8 or the
Source button on the remote control until “AV1” is
displayed on the screen. Turn the video source
component on with its power button or remote control.
The PROVD8 is now ready to play the audio and video
signals from the source connected to the AV1 input.
Wired FM Modulator
The PROVD8 is equipped with an outboard RF
modulator that allows you to listen to the PROVD8 audio
signal by tuning your vehicle’s radio to the selected
frequency, (88.3, 88.7 or 89.1). This feature is accessed
by using the FM transmitter buttons on the remote (On/
Off, Select). Whenever the RF modulator is on,
broadcast reception on the vehicle’s radio will be poor.
Switching off the FM modulator will allow normal radio
reception.
Press the FM Transmitter On/Off switch to turn the FM
Modulator on. The LCD screen will display the frequency
setting of the FM Modulator. Pressing the Select button
will change the Frequency of the FM modulator (88.3/
88.7/89.1)
AUX
A video game system, Camcorder or other audio / video
device may be connected to the AUX Input jacks (see
Figure 1. for the location of these jacks) To access the
AUX source, turn the PROVD8 on and press the source
button on the PROVD8 or the Source button on the
remote control until “AUX” is displayed on the screen.
Turn the video source component on with its power
button or remote control. The PROVD8 is now ready
to play the audio and video signals from the source
connected to the AUX input.
-11-
Loading and Playing Discs
Before you load a disc, make sure that it is compatible
with the player and that there is not a disc in the player
already
DVD Basics
To get the optimum use out of the DVD section, make
sure you read this section completely.
NOTE: that the following Discs CANNOT be used with
this player :
Regional Coding
Both the DVD player and disc are coded by region.
These regional codes must match in order for the disc
to play. If the codes don’t match, the disc won’t play.
This unit’s code is region 1. Other regional codes
cannot be played in this unit. The unit will display
“REGION CODE VIOLATION.”
MiniDisc
CD-I, CD-ROM, CD-RW, DVD-ROM
To load and Play a Disc
When you press the Power button the unit will turn on
and display the source selected. Select DVD mode
and insert the disc (Label Up) into the disc
compartment. When the disc is half way in it will be
automatically pulled in and play will begin.
NOTE: If the PROVD8 is not in DVD mode, it will not
accept the disc. Do Not Force the disc into the slot as
this could damage the mechanism.
Types of Discs your DVD will play
DVD Discs – DVDs which contain video.
CD Discs – Audio CDs containing musical or sound
content only.
MP3 Discs – A disc that contains audio files (for
example, a CD-R with downloaded MP3 files).
VCD Discs – VCD discs which contain video.
-12-
2) Select the main item you want using the cursor (pq)
Settings and Adjustments
This chapter describes how to set and how to adjust
buttons, and then press the ENTER button.
using the on-screen SETUP menu.
To Cancel Using the Setup Display
Press the SETUP button on the remote.
Using the Setup Display
Using the setup display, you can do the initial setup,
adjust the picture and sound quality, and set the various
outputs. You can also set a language for the subtitles
and the setup display and limit play back by children.
Note: You can display the setup display only when the
player is in stop mode.
To Return to the Previous Menu
Press the (t) button or RETURN on the remote.
Setting the Language for Display and Sound
(LANGUAGE SETUP)
Press the SETUP button and using the (qp) buttons
select “LANGUAGE”. Press the ENTER button. The
Language Setup allows the user to set various
languages for the on-screen display or sound.
1) Press the SETUP button to display the “setup menu”
on the TV screen.
Enter Return Setup
Enter Return Setup
-13-
Disc Menu
OSD (On-Screen Display) Language Menu
The Disc Menu allows the user to choose the preferred
language for the disc start menu. Press ENTER and
then use the (▲▲) buttons to select the appropriate
setting. The user can select English, French, German,
Spanish, or Italian. Then press ENTER to confirm the
selection.
The OSD Language Menu allows the user to select
the language for the on-screen display. Press ENTER
and then use the (▲▲) buttons to select the desired
language. The user can select either English, Frençais,
Italiano, Español or Deutsch for the OSD language.
Then press ENTER to confirm the selection.
Settings for Video
Audio Language Menu
Press the SETUP button and select VIDEO.
The VIDEO SETUP allows you to adjust the display
playback conditions.
The Audio language menu allows the user to choose
the preferred audio language. Press ENTER and then
use the (▲▲) buttons to select the desired language.
English, French, Italian, Spanish or German. Then
press ENTER to confirm the selection.
Subtitle Menu
The Subtitle Language menu allows the user to choose
the preferred language for subtitles. Press ENTER and
then use the (▲▲) buttons to select the desired
language. The user can select English, French, Italian,
Spanish or German. Then press ENTER to confirm
the selection.
Enter Return Setup
-14-
System Settings
Aspect
Settings for Audio
Press the SETUP button and select AUDIO.
The AUDIO menu is shown analog 2CH format.
This menu allows the user to select the aspect ratio of
the monitor. Press ENTER and then use the (▲▲)
buttons to select the appropriate setting.
4:3 LB (LETTER BOX) : This displays a wide
picture with black bands on the upper and
lower portions of the screen.
4:3 PS (PAN SCAN) : This displays the wide
picture on the screen with a portion of
the left and right sides removed.
16:9 WS (WIDE SCREEN) : This displays a
picture with black bands on the upper and lower
portions of the screen.
Enter Return Setup
Settings for Rating (Parental Control)
This section of the SETUP Menu allows users to control
the content of movie playback from 1 (Children) to 8
(Adult).
Then press ENTER to confirm the selection.
System Menu
NTSC format only.
Output
Video format only.
NOTE: Depending on the DVD, 4:3 LETTER BOX
may be selected automatically instead of 4:3 PAN
SCAN and vice versa.
Enter Return Setup
-15-
Playing DVD, CD and MP3 Disc
Using the On-screen Icons display
Limiting Playback by Children (Parental Control)
The Parental Control function allows you to limit viewing
to your preference.
The on-screen icons display contains many playback
features. To see the icon display, use the DISPLAY
button on the remote while a disc is playing. Each
feature of the icon display is illustrated with an icon.
Use the left/right arrow buttons (tu) on the remote
to move through the different icons in the icon display.
When an icon is highlighted, use the up/down arrow
buttons (▲▲) on the remote to scroll through the
choices displayed in the text box under the icon.
Remember, you can only access the icon display
when you are playing a disc. Also, the icon display
features are only available if the disc was created with
that particular feature (i.e., if you select the Subtitle
icon, you will not be able to change the subtitle
language unless the author of the disc created the
disc with different subtitle languages).
1. Use the (▲▲) buttons to select RATING, then
press ENTER.
2. Enter a password in 4 digits using the number
buttons, then press the ENTER button.
3. Select LEVEL using the (▲▲) buttons.
LEVEL 8 : Adult
LEVEL 7
LEVEL 6
LEVEL 5
LEVEL 4
LEVEL 3
LEVEL 2
LEVEL 1 : Children
The lower the value, the more strict the limitation.
Press the ENTER button.
The invalid symbol appears on the screen when you
press a button that does not have any function. To make
the icon display disappear from the screen, press display
on the remote unit it disappears.
Changing and Canceling the Password
To change the password, use the (▲▲) button to select
CHANGE PASSWORD, then press ENTER. Enter the old
password and then type in the new password using the
number keys and press ENTER. To cancel the password,
use the (▲▲) button to select CANCEL PASSWORD, then
press ENTER. Enter the password then press ENTER. The
OSD will display “ PSW Canceled”.
-16-
Playing DVD Disc
Q
Qsurround function. Use the (tu)
--/--
EN 2CH
Q
OFF
--/--
EN ON
buttons to move the cursor to the icon,
use the (pq) buttons to select
QSURROUND function on or off.
-/-
T
20
25
00:00:00
A
B
OFF
A-B
1 2 3 4 5
Subtitle
Display current subtitle language. Use
the (tu) buttons to move the cursor
to the icon, use the (▲▲) buttons to
select the required subtitle language or
switch on/off the subtitle.
Displays current title. Use the (tu) buttons
to move the cursor to the icon, use the (▲▲)
buttons to select required title, press ENTER
to confirm the selection.
TTitle
Chapter Display current chapter. Use the (tu)
buttons to move the cursor to the icon, use
the (▲▲) or the number buttons to select
the required chapter, press ENTER to
confirm the selection.
Angle
Multi-angle switch. Use this menu to
select angles of pictures being played.
Use the (t u) buttons to move the
cursor to the icon, use the (▲▲)buttons
to select required angle.
Time
Displays the elapsed time.
NOTE: Not all DVDs have this feature.
NOTE: The following functions can be accessed by
pressing the DISPLAY button twice or by pressing the
display button once and using the (u) button or by
pressing the REPEAT button.
Audio
Channel
Audio channel selection. Use the (tu)
buttons to move the cursor to the icon,
use the (▲▲) buttons to select the
required audio channel.
-17-
Playing CD Disc
Repeat
Repeat play function. Use the (tu)
buttons to move the cursor to the icon,
use the (▲▲) buttons or REPEAT
button to select required repeat play
function.
T
r20
PRG
00:00
A
Repeat Chapter
Repeat Title
Repeat Disc
Repeat Off
B
OFF
A-B
1 2 3 4 5
Track
Displays current track. Use the (tu)
buttons to move the cursor to the icon,
use the (tu) buttons or Number Keys
(0 to 9) to select required track, press
ENTER to confirm the selection.
Repeat A-B Repeat play from A to B selected. Use
the (tu) button to move the cursor to
the icon, use the A-B button or ENTER
button to select the A and B points.
A
T
r
B
Set Start Point A
Set End Point B
Cancel Repeat
(▲▲)
Time
Displays the elapsed time.
Use the
or A-B button to cancel.
Bookmark
Set a bookmark. Use the (tu)buttons
to move the cursor to the icon. At
maximum five bookmarks (1,2,3,4,5)
can be set. This operation is valid only
when “BOOKMARK” is displayed on
OSD. You may use the (tu) to move
the cursor to a bookmark and press
ENTER to jump to the position set and
play.
-18-
Playing MP3 Disc
Play mode
Repeat
Play mode selection. Use the (tu)
buttons to move the cursor to the icon,
use the (▲▲) buttons to select any of
the three play modes: Sequential (Off),
Programmed and Random play modes.
MP3 is format for storing digital audio. An audio CD
quality song can be compressed into the MP3 format
with very little loss of quality, while taking up much less
space. CD-R discs that have been encoded in MP3
format can be played on your DVD. For basic information
about loading and playing discs, go to page 12.
MP3 discs contain individual songs that can be
organized into directories. When you play an MP3 disc,
the MP3 info display appears as shown below.
Repeat play function. Use the (tu)
buttons to move the cursor to the icon,
use the (▲▲) buttons or REPEAT
button to select required repeat play
function.
Repeat Chapter
Repeat Disc
Repeat Off
Repeat A-B Repeat play from A to B selected. Use
Directory Tree
No
MP3 File
the (tu) buttons to move the cursor
1
2
3
4
5
6
7
8
9
Track 16......
Track 10......
Track 11......
Track 12......
Track 13......
Track 14......
Track 15......
Track 16......
Track 17......
A
to the icon, use the ENTER or A-B
button to select the required repeat play
function.
Aikara Nanase
Ayumi Hamasaki
Best of J-Pop
B
J-Pop Single
Set Start Point A
Set End Point B
Cancel Repeat
Japanese Hit 2000
(▲▲)
Now Japan Best
Speed
Use the
or A-B button to cancel.
Utada Hikaru
WinAmp 2.64
10 Track 18......
-19-
Selecting a song
Playback begins automatically when you insert an MP3
disc into the player. The PROVD8 begins playing the
songs in the order they were burned onto the disc.
To select a specific song:
1. While the disc is playing, use the number
buttons on the remote to enter the song number,
or press the up/down arrow buttons ( ▲▲ ) to go
to the next or previous song.
Selecting a directory
Because MP3 discs contain a large number of songs,
these songs are divided into directories. To select a
directory:
2. Press ENTER on the remote.
1. While a disc is playing, press the left arrow buttons
(t) to highlight the directory icon.
2. Press the up/down arrow buttons (▲▲)to go to
the next or previous directory.
MP3 File
No
T I P
1
2
3
4
5
6
7
8
9
Track 16......
Track 10......
Track 11......
Track 12......
Track 13......
Track 14......
Track 15......
Track 16......
Track 17......
You can also
advance to the
next song by
pressing
go to the preceding
song by
3. Press ENTER on the remote to go to that directory.
, or
Directory Tree
pressing
the remote.
Aikara Nanase
Ayumi Hamasaki
Best of J-Pop
10 Track 18......
J-Pop Single
Japanese Hit 2000
Now Japan Best
Speed
Utada Hikaru
WinAmp 2.64
-20-
Directory Display
Repeat Feature
This feature displays the directory that you have
selected.
The default mode for the Repeat feature is Off. There
are 4 Repeat option:
WinAmp 2.64
1.
2.
3.
4.
Repeat Off - All the songs will be
playing once
Repeat One - Repeat the song that is
1
File Display
playing
Repeat Disk - Repeat the disc that is
all
This feature displays the selected track number which
contains in the selected directory.
playing
Repeat Dir Repeat the directory that
dir
is playing
.64
dir
Directory Tree
No
MP3 File
1
2
3
4
5
6
Track 16......
Track 10......
Track 11......
Track 12......
Track 13......
Track 14......
Time Display
Aikara Nanase
Ayumi Hamasaki
Best of J-Pop
This feature displays the audio time for the length of the
song. Each time you make a song, the time restarts
from the beginning.
J-Pop Single
Japanese Hit 2000
Repeat Off
Now Japan Best
Speed
Repeat One
1
Repeat Disk
Utada Hikaru
WinAmp 2.64
all
Repeat Dir
dir
-21-
Troubleshooting
PROBLEM
To Use Repeat Feature:
SOLUTION
1. While a disc is playing, press Repeat button or right
arrow button (u) on the remote to bring up the Repeat
icon.
2. Press the up/down arrow buttons (▲▲) to highlight
the Repeat option (Repeat Off, Repeat One, Repeat
Disk, Repeat Dir).
• Check the condition of the vehicle’s
radio antenna.
• Verify that the antenna is fully raised.
• If a wired RF modulator has been
installed, verify that it is turned OFF
by using remote.
Poor in vehicle
radio reception
(FM modulator
installed)
3. Press ENTER on the remote. The selected repeat
option will shown on the right side of Time Display.
• Verify that the batteries in the remote
are fresh.
• Verify that the remote sensor eye is
not obstructed.
IR sensor
inoperative
• Verify that the infrared transmitter is
affixed over the sensor eye of the
component to be controlled.
• Insert a disc with the label side facing
up.
Disc won’t play
• Check the type of disc you put into
disc tray. This DVD only plays digital
video discs, audio CDs and MP3s.
• Both the unit and the disc are coded
by region. If the regional codes don’t
match, the disc can’t be played. This
DVD is Region Number 1.
• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.
Play starts, but
then stops
immediately
-22-
SOLUTION
PROBLEM
SOLUTION
PROBLEM
Picture is
• Make sure your DVD is connected
properly. Make sure all cables are
securely inserted into the appropriate
jacks.
• If you are using the IR headphones,
make sure you turn on the IR power.
•Make sure Modulator is ON and the
proper Frequency has been
selected.
No sound or
distorted sound
• The disc might be damaged. Try
another disc.
• It is normal for some distortion to
appear during forward or reverse
scan.
distorted
No forward or
reverse scan
• Some discs have sections that
prohibit rapid scanning or title and
chapter skip.
• If you try to skip through the warning
information and credits at the
beginning of a movie, you won’t be
able to. This part of the movie is often
programmed to prohibit skipping
through it.
Can’t advance
through a movie
• You can’t advance through the
opening credits and warning
information that appears at the
beginning of movies because the
disc is programmed to prohibit that
action.
The icon ( )
appears on
screen
The feature or action cannot be
completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support
the feature (e.g., angles)
3. The feature is not available at the
moment.
4. You’ve requested a title or chapter
number that is out of range.
-23-
Replacement Parts
Specifications
LCD Backlighting
Resolution
Edge Light Tube
Remote Control
136B2154
102B3689
102B3690
1440 x 234
Pixels
336,960
Left Protective Cover
for IR Sensor
Operation Temperature
Storage Temperature
Backlight life
32 -140º F (0 - 60º C)
-4 - 176º F (20 - 80º C)
10,000 Hours
Right Protective Cover
for HeadphonesJacks
Video Display System
Headphone Audio Output
Low Level Audio Output620 mvp-p
1 kHz @ -15 dB
NTSC/PAL
0.03W @ 16 ohms
Video Output
1.0Vp-p @ 75 ohms
12V DC
Power Source
© Copyright 2002 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788
-24-
36 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part
thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase,
such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated
bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDEDABOVEAND,INNOEVENT,SHALLTHECOMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFOR
THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHTWITHINAPERIODOF48
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A. : AUDIOVOXELECTRONICSCORPORATION, 150MARCUSBLVD., HAUPPAUGE, NEWYORK 11788l1-800-645-4994
For Customer Service
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
Visit O ur W ebsite At
WWW.audiovox.com
Product Inform ation, Photos,
FAQ ’s O wner’s M anuals
© Copyright 2002 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788
128-6258
|