XD642W
INSTALLATION/OWNER'SꢀMANUAL
AM/FM/WBꢀWeatherꢀReceiverꢀwithꢀDetachableꢀFace
XD642WꢀINSTALLATION
WiringꢀDiagram
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XD642W uses one
10 amp ATM fuse located
beside the wiring connector.
3
XD642WꢀOPERATION
ControlꢀLocations
3
4
7
9
10
11
1
2
5
6
8
21
20 19
18
17
16
15
14
13
12
Release
EQ
1
2
12
13
14
15
16
17
18
19
Band/Play/Pause
Volume
Loudness
Display
3
Mode
Tuner Scan
Mute
4
Preset 4
5
Preset 1/Repeat
Preset 5
Local/Distance
6
Auto Store/Preset Scan
Power
7
Preset 2/Random
Preset 3/Intro
Eject
8
9
20 Tune/Track Down
21
10
11
Tune/Track Up
Preset 6
4
XD642WꢀOPERATION
GeneralꢀOperation
FaceplateꢀRemoval Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Semi-permanentꢀ Remove trim ring and install supplied #1 x 7/32” Phillips
FaceplateꢀInstallation head screw through left side of mounting frame into faceplate.
PowerꢀOn/Off Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
ꢀ
Mode Press MODE to select between tuner, CD player and auxiliary
input. Modes of operation are indicated in the display.
Loudnessꢀ Press LOUD to activate and deactivate the loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Volume Adjust volume using rotary encoder (00-46).
Programmableꢀ Press and hold POWER for 3 seconds to program currently
Turn-OnꢀVolume selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
PresetꢀEQꢀCurves Press EQꢀto select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Display Press DISP to select between clock and radio frequency
(tuner mode), clock and CD track/elapsed time (CD mode), or
clock and AUX (AUX mode).
SetꢀtheꢀClock With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
to adjust the
nn
hours and TUNEꢀ
to adjust the minutes. Press DISP
ll
momentarily to save the selected time.
12/24-hourꢀClock The clock will display 12-hour AM/PM time in USA frequency
:
spacing mode (PM 10 00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
5
XD642WꢀOPERATION
GeneralꢀOperation
ꢀ
In tuner mode, press and hold DISP then press TUNEꢀ
ProgrammableꢀDisplayꢀ
Priority
ll
to select function priority display. “FREQ” will momentarily
appear in the display.
Note:
"FUNC" will appear in CD or AUX modes.
Radio frequency (tuner mode), CD track/elapsed time (CD
mode) or AUX (AUX mode) will be displayed by default.
Clock is accessed by pressing DISP momentarily.
ꢀ
Press and hold DISP then press TUNE
to select time
nn
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency
or CD track/elapsed time is accessed by pressing DISP
momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESETꢀ1 to select clock
priority on/off. “CLK ON” or “CLK OFF” will momentarily
appear in the display. Clock is accessed by pressing DISP
momentarily.
ProgrammableꢀClockꢀ
Priority
ꢀ
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
The reset button is located behind the faceplate.
Reset
Press and hold rotaryꢀencoder for 3 seconds to turn
confirmation beep on/off.
ConfirmationꢀBeep
Mute
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
6
XD642WꢀOPERATION
GeneralꢀOperation
Audio
Press rotaryꢀencoderꢀto select between Volume (default),
Bass, Treble, Balance & Fader.
VOLUME
BASS TREBLE
BALANCE
FADER
ꢀ
Bass
Press rotaryꢀencoder until BAS appears
Rotate encoder left/right to adjust
( -6 minimum / +6 maximum)
Treble
Press rotaryꢀencoder until TRE appears
Rotate encoder left/right to adjust
( -6 minimum / +6 maximum)
Balance
Press rotaryꢀencoder until BAL appears
Rotate encoder left/right to adjust
(BAL L 12-BAL 00-BAL R 12)
BAL 00 represents equal balance
Fader
Press rotaryꢀencoder until FAD appears
Rotate encoder left/right to adjust
(FAD F 12-FAD 00-FAD R 12)
FAD 00 represents equal fader
SourceꢀAudioꢀMemory
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, and AUX modes. This allows you to save the
Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
7
XD642WꢀOPERATION
TunerꢀOperation
SeekꢀTuning Press TUNE
or TUNEꢀ
next strong station.
momentarily to seek the
for more than 2 seconds,
nn
ll
ll
ManualꢀTuning Press TUNE
or TUNEꢀ
nn
then release. "MANUAL" will momentarily appear in the
display. Press TUNE
or TUNEꢀ
momentarily to
nn
ll
move radio frequency up or down one step at a time. Press
and hold to advance quickly. If tuning is not adjusted for 5
seconds, the unit will return to seek tuning mode (default).
"AUTO" will momentarily appear in the display.
ScanꢀTuning Press SCAN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCAN again to cancel.
Local/Distance Press LOC to activate local tuning for strong station reception
only. Press LOC again to cancel and resume Distance tuning
(default).
Bandꢀ Press BAND to select between FM1, FM2, FM3, AM1 and AM2
bands.
ꢀ
FrequencyꢀSpacing Press and hold BAND then press TUNE
to select
nn
European frequency spacing. Press and hold BAND then
ꢀ
press TUNEꢀ
to select USA frequency spacing (default).
ll
StoringꢀandꢀRecallingꢀ Up to 18 FM stations and 12 AM stations can be stored. To
StationꢀPresets store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Press AS/PS for more than 2 seconds to automatically store
the six strongest stations in the current band. Automatic
Local/Distance is activated during the initial band scan.
AutomaticallyꢀStoreꢀ
Stations
Press AS/PS for less than 2 seconds to scan presets 1-6 on
the current band, pausing for 5 seconds at each. Press
AS/PS again to cancel.
PresetꢀScan
8
XD642WꢀOPERATION
WeatherbandꢀTunerꢀOperation
Press TUNE
next weatherband station.
ꢀor TUNEꢀ
momentarily to seek the
ManualꢀTuning
DirectꢀTuning
nn
ll
Press preset 1-6 or BAND to directly access the
7 weatherband stations. Refer to the table below.
WeatherbandꢀStationsꢀ-ꢀDirectꢀTuningꢀTable
Button
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
BAND
WBꢀFrequency
162.400 MHz
162.425 MHz
162.450 MHz
162.475 MHz
162.500 MHz
162.525 MHz
162.550 MHz
LCDꢀDisplay
WB 162.400
WB 162.425
WB 162.450
WB 162.475
WB 162.500
WB 162.525
WB 162.550
9
XD642WꢀOPERATION
CDꢀPlayerꢀOperation
With the label facing up, insert a standard size CD into the
InsertꢀCD
CD slot. The CD will automatically begin playback.
Press EJECT to eject the CD. The unit will change to previous
mode of operation (AM, FM, or auxiliary input). If the disc is
not removed within 10 seconds, the unit will reload the disc.
The unit does not have to be turned on to eject CD.
EjectꢀCD
Press TRACKꢀ
Press TRACK
track. Pressing TRACK
the previous track.
to skip to the beginning of the next track.
to return to the beginning of the current
TrackꢀSelect
ll
nn
again skips to the beginning of
nn
Press and hold TRACKꢀ
or reverse a track.
or TRACK
to fast forward
FastꢀForwardꢀandꢀReverse
ll
nn
Press
Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
Pause
Intro
l
l
Press INTꢀto play the first 10 seconds of each track.
Press INT again to cancel.
Press RPT to continuously repeat selected track.
Press RPT again to cancel.
Repeat
Random
Press RDM to play all tracks in random order. Press RDM
again to cancel. Random mode is retained in memory when
selecting between tuner, CD player and auxiliary input
modes and when the unit is turned on/off.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method. In
addition, the following CDs may be incompatible with this
unit:
CD-R/CD-RWꢀCompatibility
CDs exposed to extreme temperatures or direct sunlight for
extended periods of time, CDs recorded in which a recording
session failed or a re-recording was attempted and, or
encrypted or copy-protected CDs which do not conform to
the audio CD-DA red book recording standard.
10
XD642WꢀWARRANTY
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀLimitedꢀOneꢀYearꢀWarranty
This warranty gives you specific legal rights.
You may also have other rights which vary from
state to state.
Whatꢀtoꢀdo?
1. Before you call for service, check the
troubleshooting guide in your owner’s
manual. A slight adjustment of any custom
controls in your owner's manual may save
you a service call.
Dual Electronics Corp. warrants this product to
the original purchaser to be free from defects in
material and workmanship for a period of one
year from the date of the original purchase.
2. If you require service during the warranty
period, you must carefully pack the product
(preferably in the original package) and ship
it by prepaid transportation with a copy of the
original receipt from the retailer to an
authorized service center.
Dual Electronics Corp. agrees, at our option,
during the warranty period, to repair any defect
in material or workmanship or to furnish an
equal new, renewed or comparable product
(whichever is deemed necessary) in exchange
without charges, subject to verification of the
defect or malfunction and proof of the date of
purchase. Subsequent replacement products
are warranted for the balance of the original
warranty period.
3. Please describe your problem in writing and
include your name, a USA return shipping
address (P.O. Box not acceptable), and a
daytime phone number with your shipment.
4. For more information and for the location of
the nearest authorized service center please
contact us by one of the following methods:
Whoꢀisꢀcovered?ꢀThis warranty is extended to
the original retail purchaser for products
purchased and used in the U.S.A.
• Call us toll-free at 1-866-382-5476
• E-mail us at [email protected]
Whatꢀisꢀcovered?ꢀThis warranty covers all
defects in material and workmanship in this
product. The following are not covered:
installation/removal costs, damage resulting
from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect
line voltage, unauthorized repair or failure to
follow instructions supplied with the product,
or damage occurring during return shipment of
the product.
Exclusion of Certain Damages: This warranty
is exclusive and in lieu of any and all other
warranties, expressed or implied, including
without limitation the implied warranties of
merchantability and fitness for a particular
purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether
or not arising from the company’s negligence,
actual or imputed. No person or representative
is authorized to assume for the company any
other liability in connection with the sale of
this product. In no event shall the company be
liable for indirect, incidental or consequential
damages.
11
XD642WꢀOPERATION
Specifications
CDꢀPlayer Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 1ꢀBit
FMꢀTuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AMꢀTuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
General Operating voltage: 11-16ꢀVDC,ꢀnegativeꢀground
Speaker output impedance: 4~8ꢀohms
Line output voltage: 2ꢀVolts
Dimensions: 7"ꢀxꢀ7"ꢀxꢀ2"ꢀ(178ꢀxꢀ178ꢀxꢀ51ꢀmm)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
12
XD642WꢀOPERATION
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀTroubleshooting
Problem
Cause
Action
Unitꢀwillꢀnotꢀturnꢀonꢀ
(noꢀpower)
Yellow wire not connected or incorrect voltage Check connections for proper voltage
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
(11~16VDC)
Check connection to ground
Replace fuse
Unitꢀhasꢀpowerꢀ
(butꢀnoꢀsound)
Speaker wires not connected
Check connections at speakers
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
Unitꢀblowsꢀfuses
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Excessiveꢀskipping
Unit is not mounted correctly or backstrap is
not secure
Check mounting sleeve and backstrap
support
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches
ERROR-01ꢀappearsꢀ
onꢀdisplay
Disc read error
Press eject or RESET
ERROR-02ꢀappearsꢀ
onꢀdisplay
Focus error or disc is in upside down
CD mechanism position out of alignment
Press eject or RESET
Unitꢀwillꢀnotꢀacceptꢀ
aꢀdisc
Press EJECT for 3 seconds to reset
CD mechanism position
CD transit screws still in place
Remove 2 transit screws located on
top of the unit
13
Dual Electronics Corp.
Toll Free: 1-866-382-5476
©2006 Dual Electronics Corp. All rights reserved.
NSA 1106 - V1.1
|