XDMA690
INSTALLATION/OWNER'SꢀMANUAL
™
AM/FM/CD/MP3/WMA/iPod ꢀReadyꢀReceiverꢀwithꢀDetachꢀFace
XDMA690ꢀINSTALLATION
WiringꢀDiagram
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XDMA690 uses one
10 amp ATM fuse located
beside the wiring connector.
3
XDMA690ꢀOPERATION
ControlꢀLocations
3
4
7
9
10
11
1
2
5
6
8
21
20 19
18
17
16
15
14
13
12
Release
EQ/9
1
2
12
13
14
15
16
17
18
19
Band/Play/Pause
Volume
Loudness
Display/0
3
Mode/Search
Tuner Scan/8
Mute
4
Preset 4/Menu
Preset 1/Repeat
Preset 5/Folder Down
Preset 2/Random
Preset 3/Intro
Eject
5
Return/7
6
Auto Store/Preset Scan/Enter
Power
7
8
9
20 Tune/Track Down
21
10
11
Tune/Track Up
Preset 6/Folder Up
The XDMA690 allows playback of your favorite MP3 and WMA files recorded on CD-R and
CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while
maintaining near-CD sound quality. An internal SRAM buffer provides ESP (Electronic
Skip Protection) to virtually eliminate skipping and allows alphanumeric or direct track
search - even while a song is currently playing!
4
XDMA690ꢀOPERATION
GeneralꢀOperation
FaceplateꢀRemoval Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Semi-permanentꢀ Remove trim ring and install supplied #1 x 7/32” Phillips
FaceplateꢀInstallation head screw through left side of mounting frame into faceplate.
PowerꢀOn/Off Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
ꢀ
Mode Press MODE to select between tuner, CD player, auxiliary
input and iPod mode. Modes of operation are indicated in the
display.
Loudnessꢀ Press LOUD to activate and deactivate the loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Volume Adjust volume using rotary encoder (00-46).
Programmableꢀ Press and hold POWER for 3 seconds to program currently
Turn-OnꢀVolume selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
PresetꢀEQꢀCurves Press EQꢀto select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Display Press DISP to select between clock and different types of
information, such as radio frequency, CD track/elapsed time,
or MP3/WMA/iPod song information.
SetꢀtheꢀClock With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
to adjust the
nn
hours and TUNEꢀ
to adjust the minutes. Press DISP
ll
momentarily to save the selected time.
12/24-hourꢀClock The clock will display 12-hour AM/PM time in USA frequency
:
spacing mode (PM 10 00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
5
XDMA690ꢀOPERATION
GeneralꢀOperationꢀ-ꢀSetupꢀMenu
Reset Press to RESET the unit upon initial installation or if
abnormal operation occurs. The reset button is located
behind the faceplate.
Mute Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
SetupꢀMenuꢀ Press and hold the rotaryꢀencoder for more than 3 seconds
to access the setup menu. Press the rotaryꢀencoder
momentarily to select between the menu functions and
rotate the rotaryꢀencoder left/right to adjust or activate the
desired function.
MenuꢀFunction
Options
Action
TunerꢀFrequencyꢀ FREQ USA Programs the unit to USA tuner spacing.
Spacing
(200kHz for FM and 10kHz for AM)
FREQ EUR Programs the unit to European tuner spacing.
(50kHz for FM and 9kHz for AM)
ClockꢀDisplay
CLK OFF
Programs the unit to not display the clock when the
power is off.
CLK ON
Programs the unit to display the clock when the
power is off.
AuxiliaryꢀMode
AUX ON
Enables access to auxiliary mode.
Disables access to auxiliary mode.
Disables the confirmation beep.
Enables the confirmation beep.
Activates Distance tuning.
AUX OFF
BEEP OFF
BEEP ON
LOC OFF
LOC ON
Beepꢀ
Confirmation
Local/Distanceꢀ
Tuning
Activates Local tuning for strong station reception
only.
Powerꢀonꢀ
Message
MSG OFF
MSG ON
DEMO ON
Disables power on message.
Enables power on message to be displayed.
MadeꢀforꢀiPod
Message
Enables Made for iPod message to be displayed
every 60 seconds in Tuner and Aux modes.
DEMO OFF Disables Made for iPod message.
6
XDMA690ꢀOPERATION
GeneralꢀOperation
Audio
Press rotaryꢀencoderꢀto select between Volume (default),
Bass, Treble, Balance & Fader.
VOLUME
BASS TREBLE
BALANCE
FADER
ꢀ
Bass
Press rotaryꢀencoder until BAS appears
Rotate encoder left/right to adjust
( -6 minimum / +6 maximum)
Treble
Press rotaryꢀencoder until TRE appears
Rotate encoder left/right to adjust
( -6 minimum / +6 maximum)
Balance
Press rotaryꢀencoder until BAL appears
Rotate encoder left/right to adjust
(BAL L 12-BAL 00-BAL R 12)
BAL 00 represents equal balance
Fader
Press rotaryꢀencoder until FAD appears
Rotate encoder left/right to adjust
(FAD F 12-FAD 00-FAD R 12)
FAD 00 represents equal fader
SourceꢀAudioꢀMemory
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, AUX and iPod modes. This allows you to
save the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
7
XDMA690ꢀOPERATION
TunerꢀOperation
SeekꢀTuning Press TUNE
or TUNEꢀ
next strong station.
momentarily to seek the
until "MANUAL"
nn
ll
ll
ManualꢀTuning Press TUNE
or TUNEꢀ
nn
momentarily appears in the display, then release. Press
TUNE
or TUNEꢀ
momentarily to move radio
nn
ll
frequency up or down one step at a time. Press and hold to
advance quickly. If tuning is not adjusted for 5 seconds, the
unit will return to seek tuning mode (default). "AUTO" will
momentarily appear in the display.
ScanꢀTuning Press SCN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCN again to cancel.
Bandꢀ Press BAND to select between FM1, FM2, FM3, AM1 and AM2
bands.
StoringꢀandꢀRecallingꢀ Up to 18 FM stations and 12 AM stations can be stored. To
StationꢀPresets store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Note:
Function buttons 7, 8, 9 and 0 apply to MP3 and WMA
playback only.
AutomaticallyꢀStoreꢀ Press AS/PS for more than 2 seconds to automatically store
Stations the six strongest stations in the current band. Automatic
Distance tuning is activated during the initial band scan.
PresetꢀScan Press AS/PS for less than 2 seconds to scan presets 1-6 on
the current band, pausing for 5 seconds at each. Press
AS/PS again to cancel.
8
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperation
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
InsertꢀCD
EjectꢀCD
Press EJECT to eject the CD. The unit will change to previous
mode of operation (Tuner, Aux, or iPod mode). If the disc is
not removed within 10 seconds, the unit will reload the disc.
The unit does not have to be turned on to eject CD.
Press TRACKꢀ
Press TRACK
track. Pressing TRACK
the previous track.
to skip to the beginning of the next track.
to return to the beginning of the current
TrackꢀSelect
ll
nn
again skips to the beginning of
nn
Press and hold TRACKꢀ
or reverse a track.
or TRACK
to fast forward
FastꢀForwardꢀandꢀReverse
ll
nn
Press
Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
Pause
Intro
l
l
Press INTꢀto play the first 10 seconds of each track.
Press INT again to cancel.
Press RPT to continuously repeat selected track.
Press RPT again to cancel.
Repeat
Random
Press RDM to play all tracks in random order. Press RDM
again to cancel. Random mode is retained in memory when
selecting between tuner, CD player, auxiliary input and iPod
modes and when the unit is turned on/off.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method. In
addition, the following CDs may be incompatible with this
unit:
CD-R/CD-RWꢀCompatibility
CDs exposed to extreme temperatures or direct sunlight for
extended periods of time, CDs recorded in which a recording
session failed or a re-recording was attempted and, or
encrypted or copy-protected CDs which do not conform to
the audio CD-DA red book recording standard.
9
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
When an MP3/WMA encoded disc is first inserted,
PlayingꢀanꢀMP3/WMAꢀDisc
“READING” will appear in the display. Depending on the
number of files and folders, this may take several seconds.
The
icon will illuminate anytime a valid MP3 encoded
MP3ꢀIcon
WMAꢀIcon
disc is inserted and flash in MP3 search/navigate modes.
The
icon will illuminate anytime a valid WMA encoded
disc is inserted and flash in WMA search/navigate modes.
FolderꢀIcon
The
icon will illuminate anytime a folder is selected in
the file/folder search modes.
DisplayingꢀInformation
Press DISP to select between track number/elapsed time
(default), clock, track name, directory name, title, artist and
album.
“NO ID3 TAG” will be displayed if the MP3 file contains no
ID3 tag information.
“UNKNOWN” will be displayed if the WMA file contains no
WMA tag information.
“ROOT” will be displayed if the directory name of a root
folder is not labeled.
CharacterꢀSupport
Maximum character display information
• Track name – 32 character maximum
• Directory name – 23 character maximum
• *Song title – 30 character maximum
• *Artist name – 30 character maximum
• *Album name – 30 character maximum
*Song title, Artist Name and Album name will only be
displayed if included with the MP3/WMA file.
When referring to MP3/WMA playback, the following terms
are synonymous:
• File name and track name
• Folder name and directory name
10
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
Refer to the following button function table when selecting, searching or
navigating MP3/WMA files and folders:
MP3/WMAꢀButtonꢀFunctionꢀTable
Buttonꢀ
Functionꢀꢀ
SRCH
Direct Select, Search and Navigate Modes
Enter/Confirm
A, B, C, 1
Preset 1
Preset 2
D, E, F, 2
Preset 3
G, H, I, 3
Preset 4
J, K, L, 4
Preset 5
M, N, O, 5
Preset 6
P, Q, R, 6
7
S, T, U, 7
8
V, W, X, 8
9
Y, Z, /, 9
0
LOUD
-, _, +, 0
Character Shift
Character Select (A, B, C ~ 8, 9, 0)
Character Backspace
Rotate Rotary Encoder
MUTE
DirectꢀSelect,ꢀSearchꢀandꢀ
NavigateꢀModesꢀ
Press SRCHꢀfor more than 3 seconds, to select between the
following modes:
• Direct File Select
• Alphanumeric File or Folder Search
• File or Folder Navigate
DirectꢀFileꢀSelect
Stepꢀ1
Press SRCHꢀfor more than 3 seconds, then release.
“MP3 T " or “WMA T ” will flash in the display. Use the
*
*
buttons in the above table (3 keystroke maximum input),
or the rotary encoder to enter the desired file number.
Stepꢀ2
Press
to confirm the selected file number or wait for
the input cycle to time out (approximately 5 seconds).
If the file is not available, “NO FILE” will be displayed
momentarily and the current file will continue to play.
11
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
AlphanumericꢀFileꢀ
orꢀFolderꢀSearch
Stepꢀ1
Press SRCHꢀfor more than 3 seconds, then release.
Press SRCHꢀagain, an " " will flash in the display.
*
Use the buttons in the table on page 11 (32 character
maximum input) or the rotary encoder to enter the desired
alphanumeric search characters. Press LOUD to advance
one character to the right.
Stepꢀ2
Stepꢀ3
Press
to initiate the selected alphanumeric search.
Turn the rotary encoder to preview the search results.
If the search returns a folder, the icon will illuminate.
Stepꢀꢀ4
Stepꢀ5
Press
to select the desired file or folder. If a folder is
selected, "/ꢀ/" will be displayed. Turn the rotary encoder to
the right to begin searching files in the folder.
Press
Note:
to select the desired file within the folder.
If the file is not available, “NO FILE” will be displayed
momentarily and the current file will continue to play.
File/FolderꢀNavigate
Stepꢀ1
Press SRCHꢀfor more than 3 seconds, then release.
Press SRCHꢀagain two times to navigate files/folders
on the disc. The current folder name will scroll one time
followed by available files and folders.
Stepꢀ2
Stepꢀ3
Stepꢀ4
Turn the rotary encoder to preview files/folders in the
current folder. If a folder is selected, the
illuminate.
icon will
Press
to select the desired file or folder. If a folder is
selected, "/ꢀ/ꢀ" will be displayed. Turn the rotary encoder to
the right to begin searching files in the folder.
Press
to select the desired file within the folder.
*FolderꢀAccess
(Upꢀꢀoneꢀlevel)ꢀ
When navigating folders (and “/ꢀ/“ is displayed), press LOUDꢀ
to access the previous level (up one level).
*Only available on MP3/WMA discs recorded with more
than one folder.
12
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
NavigatingꢀNote After navigating by direct select, alphanumeric search or
file/folder navigate modes, the track number and elapsed
time will be displayed by default. Press DISP momentarily
to select clock, track name, directory name, title, artist or
album.
*FolderꢀAccessꢀ Press
to select the previous folder.
to select the next folder.
Press
*Folder access is only available on MP3/WMA discs recorded
with more than one folder.
FileꢀRepeat Press RPT momentarily to continuously repeat selected file.
Press RPT again to cancel.
FileꢀRepeat Press RPT for more than 2 seconds to consecutively repeat
(CurrentꢀFolderꢀOnly) all files in the current folder only. The
the display when in folder repeat mode.
Press RPT again to cancel.
icon will appear in
DiscꢀRandom Press RDM momentarily to play all files on entire disc in
random order. Press RDM again to cancel.
FolderꢀRandom Press RDM for more than 2 seconds to play all files in
current folder only in random order. The
icon will
appear in the display when in folder random mode.
Press RDM again to cancel.
DiscꢀIntro Press INT momentarily to play the first 10 seconds of each
file on the entire MP3/WMA disc. Press INT again to cancel.
FolderꢀIntro Press INT for more than 2 seconds to play the first 10
seconds of each file in the current folder only. The
will appear in the display when in folder intro mode.
Press INT again to cancel.
icon
Note:
File repeat (current folder only), folder random and folder
intro is only available on MP3/WMA discs recorded with
more than one folder.
13
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
MediaꢀCompatibility The following types of discs/files are compatible:
• CD-ROM (ISO), CD-R, CD-RW
• CD-DA
• MP3 data
• WMA data
The following types of discs/files are not compatible:
• WMA files that are protected by DRM (Digital Rights
Management).
• WMA lossless format
• Discs recorded with Track At Once or packet writing
• MP3 PRO format
• MP3 playlists
• WAV format
PlaybackꢀOrder MP3/WMA playback sequence is based on recorded order
of files and begins in the root folder of the disc. Any empty
folders or folders that do not include MP3/WMA files are
skipped. This unit may not play files in the order they were
recorded in. Refer to your recording software’s user’s manual
for more information.
CompatibleꢀRecordingꢀ • ISO9660 level 1
Formats • ISO9660 level 2
• Yellow Book MODE 1
• Yellow Book MODE 2 FORM 1
• Multi session
• Maximum folders and files - 256
• Maximum folder levels - 8
• MPEG-1/2/2.5 Audio Layer-3
ISO9660 standards:
• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z
(all caps), numbers 0-9, and “_” (underscore). Some
characters may not be displayed correctly, depending on
the character type.
• This device can play back discs in Joliet, Romeo, and other
standards that conform to ISO9660. MP3/WMA written in the
formats other than the above may not play and/or their file
names or folder names may not be displayed properly.
14
XDMA690ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
AdditionalꢀMP3/WMAꢀ An internal buffer provides ESP (Electronic Skip Protection)
Information to virtually eliminate skipping.
When playing a disc recorded with regular audio files
(CD-DA or .WAV) and MP3/WMA files, the unit will play the
MP3/WMA files only.
Only MP3 files with filename extension (.mp3) can be played.
Only WMA files with filename extension (.wma) can be played.
Do not attempt to play discs which contain non-MP3/WMA
files with the MP3/WMA extension.
SamplingꢀFrequencyꢀRates
MP3 8kHz ~ 48kHz
WMA 32kHz ~ 48kHz
TransferꢀBitꢀrates
MP3 8kbps ~ 320kbps constant
Variable bit rates
WMA 32kbps ~ 192kbps constant
Variable bit rates
Note:
Some files may not play or be displayed correctly, depending
on sampling rates and bit rates.
MP3ꢀTagꢀDisplay ID3 tags Version 1.x
This model will not display ID3 Version 2.0 or greater tags.
RecommendedꢀSettings For best results, use the following settings when burning an
MP3 disc:
128kbps or higher constant bit rate
44.1kHz or higher sampling frequency
For best results, use the following settings when burning a
WMA disc:
64kbps or higher constant bit rate
32kHz or higher sampling frequency
15
XDMA690ꢀOPERATION
iPod™ꢀOperationꢀ(Optional)
ConnectꢀiPod Connect iPod using the supplied cable. Press MODE until
(NotꢀIncluded) "IPOD" appears in the display. The iPod will automatically
begin playback. If a song is playing on the iPod before it is
connected, it will continue to play.
DisplayingꢀInformation Press DISP to select between elapsed time (default), track
number, clock, title, artist and album.
“UNKNOWN ARTIST” will be displayed if the file contains no
artist tag information.
“UNKNOWN ALBUM” will be displayed if the file contains no
album tag information.
SearchꢀFunctions Press MENU once to enter the search mode. Turn the rotary
encoder to select between playlist, artist, album and song.
Press MENU to select the desired search type. Press RTN to
to access the previous level (up one level).
PlaylistꢀSearch
Turn the rotary encoder to select between playlists. Press
MENU to select desired playlist. Turn the rotary encoder to
select between songs from the chosen playlist. Press
to begin playback.
ArtistꢀNameꢀSearch
Turn the rotary encoder to select between artists. Press MENU
to select desired artist. Turn the rotary encoder to select
between albums from the chosen artist. Press MENU to select
desired album from the chosen artist. Turn the rotary encoder
to select between songs from the chosen album. Press
to begin playback.
AlbumꢀNameꢀSearch
Turn the rotary encoder to select between albums. Press
MENU to select desired album. Turn the rotary encoder to
select between songs from the chosen album. Press
to begin playback.
SongꢀNameꢀSearch
SongꢀSelect
Turn the rotary encoder to select between songs. Press
to begin playback.
Press
nn
to skip to the beginning of the next song. Press
to return to the beginning of the current song. Pressing
again skips to the beginning of the previous song.
ll
nn
16
XDMA690ꢀOPERATION
iPod™ꢀOperationꢀ(Optional)
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀFastꢀForwardꢀ Press and hold
or
to fast forward or reverse a
ll nn
andꢀReverse
song.
ꢀꢀ
Pause
Press
Press
/
/
II to temporarily stop playback.
II again to resume playback.
l
l
Intro
Press INTꢀto play the first 10 seconds of each song.
Press INT again to cancel.
Repeat
Press RPT to continuously repeat selected song.
Press RPT again to cancel.
It is not possible to select songs in repeat mode.
Random
Press RDM to play all songs in random order. Press RDM
again to cancel. Random mode is retained in memory when
selecting between Tuner, CD player, Aux and iPod modes
and when the unit is turned on/off.
CharacterꢀSupport
Only alphanumeric characters can be displayed (ASCII type).
"NO SUPPORT" will be displayed if the file contains
characters that can not be displayed.
"NO SONG" will be displayed if there are no songs in the
selected playlist.
Maximum character display information
• Song title – 30 character maximum
• *Artist name – 30 character maximum
• *Album name – 30 character maximum
*Artist Name and Album name will only be displayed if
included with the file.
iPodꢀCompatibility
The following models are supported:
• Third generation iPod - Version 2.3
• Fourth generation iPod - Version 3.1.1
• Fifth generation iPod - Version 1.1.2
• iPod Photo - Version 1.2.1
• iPod Mini - Version 1.4.1
• iPod Nano - Version 1.2.0
Refer to your iPod instruction manual for details on how to
obtain the latest software.
17
XDMA690ꢀWARRANTY
LimitedꢀOneꢀYearꢀWarranty
This warranty gives you specific legal rights.
You may also have other rights which vary from
state to state.
Whatꢀtoꢀdo?
1. Before you call for service, check the
troubleshooting guide in your owner’s
manual. A slight adjustment of any custom
controls in your owner's manual may save
you a service call.
Dual Electronics Corp. warrants this product to
the original purchaser to be free from defects in
material and workmanship for a period of one
year from the date of the original purchase.
2. If you require service during the warranty
period, you must carefully pack the product
(preferably in the original package) and ship
it by prepaid transportation with a copy of the
original receipt from the retailer to an
authorized service center.
Dual Electronics Corp. agrees, at our option,
during the warranty period, to repair any defect
in material or workmanship or to furnish an
equal new, renewed or comparable product
(whichever is deemed necessary) in exchange
without charges, subject to verification of the
defect or malfunction and proof of the date of
purchase. Subsequent replacement products
are warranted for the balance of the original
warranty period.
3. Please describe your problem in writing and
include your name, a USA return shipping
address (P.O. Box not acceptable), and a
daytime phone number with your shipment.
4. For more information and for the location of
the nearest authorized service center please
contact us by one of the following methods:
Whoꢀisꢀcovered?ꢀThis warranty is extended to
the original retail purchaser for products
purchased and used in the U.S.A.
• Call us toll-free at 1-866-382-5476
• E-mail us at [email protected]
Whatꢀisꢀcovered?ꢀThis warranty covers all
defects in material and workmanship in this
product. The following are not covered:
installation/removal costs, damage resulting
from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect
line voltage, unauthorized repair or failure to
follow instructions supplied with the product,
or damage occurring during return shipment of
the product.
Exclusion of Certain Damages: This warranty
is exclusive and in lieu of any and all other
warranties, expressed or implied, including
without limitation the implied warranties of
merchantability and fitness for a particular
purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether
or not arising from the company’s negligence,
actual or imputed. No person or representative
is authorized to assume for the company any
other liability in connection with the sale of
this product. In no event shall the company be
liable for indirect, incidental or consequential
damages.
18
XDMA690ꢀOPERATION
Specifications
CDꢀPlayer Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 1ꢀBit
FMꢀTuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AMꢀTuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
General Operating voltage: 11-16ꢀVDC,ꢀnegativeꢀground
Speaker output impedance: 4~8ꢀohms
Line output voltage: 2ꢀVolts
Dimensions: 7"ꢀxꢀ7"ꢀxꢀ2"ꢀ(178ꢀxꢀ178ꢀxꢀ51ꢀmm)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
19
XDMA690ꢀOPERATION
Troubleshooting
Problem
Cause
Action
Unitꢀwillꢀnotꢀturnꢀonꢀ
(noꢀpower)
Yellow wire not connected or incorrect voltage Check connections for proper voltage
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
(11~16VDC)
Check connection to ground
Replace fuse
Unitꢀhasꢀpowerꢀ
(butꢀnoꢀsound)
Speaker wires not connected
Check connections at speakers
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
Unitꢀblowsꢀfuses
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Excessiveꢀskipping
Unit is not mounted correctly or backstrap is
not secure
Check mounting sleeve and backstrap
support
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches
ERROR-01ꢀappearsꢀ
onꢀdisplay
Disc read error
Press eject or RESET
Press eject or RESET
Press eject or RESET
Press eject or RESET
ERROR-02ꢀappearsꢀ
onꢀdisplay
Focus error or disc is in upside down
FAT error
ERROR-03ꢀappearsꢀ
onꢀdisplay
ERROR-04ꢀappearsꢀ
onꢀdisplay
MP3/WMA decode error
PROTECTꢀappearsꢀ
onꢀdisplay
The WMA file is copy-protected by DRM
(Digital Rights Management)
Write disc using WMA files that are not
copy-protected
NOꢀFILEꢀappearsꢀ
onꢀdisplay
Selected file is not available in direct or
alphanumeric search modes
Repeat search using valid parameters
INVALIDꢀappearsꢀ
onꢀdisplay
The WMA file is copy-protected by DRM
(Digital Rights Management)
Write disc using valid audio files with
.mp3 or .wma file extensions
Unitꢀwillꢀnotꢀacceptꢀ
aꢀdisc
CD mechanism position out of alignment
Press EJECT for 3 seconds to reset
CD mechanism position
CD transit screws still in place
Remove 2 transit screws located on
top of the unit
Dual Electronics Corp.
Toll Free: 1-866-626-7863
©2006 Dual Electronics Corp. All rights reserved.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United
States and or other countries. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
NSA1006-V01.5
|