SB-F-F15002/10W3v3__IINNSSTTRR__SSKKUU##001111225511
INSTALLATION
D I F F I C U LT Y :
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
OUT
OF
I N S T A L L A T I O N G U I D E
for the
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
15
SB-F-F1502/10W3v3
2004 - 20088 Ford F-1550 Supeerr CCrrew & Super CCab
&
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
ESTIMATED TIME:
1 HOUR
2006 - 20008 Linncoln MMaarrk LT
S T E P
1
Remove all contents from the rear seating area.
Lift up both seats.
Remove the jack, jack tools and the jack’s mounting bracket.
The jack and the jack tools must be relocated.
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
S T E P
2
Thread a supplied socket cup screw into the driver’s side rear
of the Stealthbox®, leaving 1.0” of the threads exposed.
We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio
dealer. The installation professionals employed by your dealer have the necessary tools and experience
to disassemble and reassemble your vehicle properly. If you prefer to perform your own installation,
please read this installation guide completely
before beginning the process.
S T E P
3
Thread another supplied socket cup screw into the
passenger’s side rear of the Stealthbox®, leaving 1.0” of the
threads exposed.
Continued on Next Page
|