Dual Headphones BTV30 User Manual

BTV30  
INSTALLATION/OWNER'SꢀMANUAL  
UniversalꢀBluetooth®ꢀꢀSpeakerphone  
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
INTRODUCTION  
ControlꢀLocations  
G
Visor Clip  
LCD  
Speaker  
Microphone  
Earphone Jack  
JOG Button  
Charging Port  
End Button  
Hotline Button  
Talk Button  
DisplayꢀComponents  
Bluetooth Connection  
Mute  
Volume  
Bluetooth Signal Strength  
Status Display  
Call Activation  
Battery Meter  
2
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
PowerꢀOn  
Gently lift the LCD flap to turn the unit on. The LCD will  
illuminate, and "HELLO" will appear momentarily in  
the display.  
Note: After 60 seconds of no activity, the LCD  
illumination will turn off and the unit will enter power  
save mode. Press any button to exit power save mode.  
PowerꢀOff  
Gently close the LCD flap to turn the unit off.  
BluetoothꢀPairing  
1) To pair a Bluetooth enabled mobile phone to the BTV30, press  
seconds. "PAIRING" will appear in the display.  
for three  
2) The unit will broadcast a signal for 60 seconds. To manually exit pairing mode  
during this time, press momentarily.  
3) Complete the pairing from the Bluetooth menu of the phone by searching  
for new devices. Please refer to the phone's instruction manual for further  
information on Bluetooth pairing and connections.  
4) The phone will display the unit model name (BTV30) and prompt to begin pairing.  
5) When prompted, enter the four-digit PIN number (0000).  
AutomaticꢀConnection  
When the unit is turned on, it will automatically reconnect to the phone to which  
it was last connected. If the phone does not connect automatically, press  
reconnect. Some phones may not support this feature.  
to  
Disconnectingꢀ  
Disconnect a phone from the BTV30 by using the Bluetooth menu of the phone.  
Please refer to the phone's instruction manual for further information.  
3
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
MakingꢀaꢀCall  
NumberꢀDialing  
Select a phone number in one of the following two ways:  
• Press JOG to the right to scroll through the last five numbers.  
• Press JOG to the left, and follow the prompts to search for a phone book entry.  
Refer to page 8 for a detailed explanation of the phone book search function.  
Once the desired number is selected, press  
to connect the call.  
LastꢀNumberꢀRedialing  
Press  
one time to redial the last outgoing number. If no phone number is  
available, a beep will be heard.  
VoiceꢀRecognitionꢀDialing  
Press and hold  
for three seconds to activate voice dialing on the mobile phone.  
briefly to cancel.  
When the unit beeps, speak the desired name. Press  
Note: This feature will only work with phones that support voice dialing.  
HotlineꢀDialing  
Use the menu to input a hotline number (see page 7 for instructions), which  
provides one-touch access to a commonly-called number. Press H (the hotline  
button) at any time to dial the programmed number.  
ReceivingꢀaꢀCall  
The unit will ring and display the phone number of the incoming call. If the call is  
from a number stored in the phone book, the caller's name will be displayed on the  
LCD. Press  
to answer the call.  
RejectingꢀaꢀCall  
When the unit rings, press  
to reject the incoming call.  
.
EndingꢀaꢀCall  
To end an active call, press  
4
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
TransferringꢀaꢀCall  
Press  
during a phone call to transfer audio between the BTV30 and a phone.  
Tip: Transfer audio to the phone before turning the BTV30 off.  
CallꢀWaiting  
The unit allows two options for answering an incoming call while on an active call:  
To place the current call on hold and answer an incoming call, press and  
hold JOG to the right for two seconds. The unit will beep, and the  
incoming call will become active. To return to the original call, press and hold  
JOG to the right for two seconds.  
To end the current call and answer an incoming call, hold JOG to the  
left for two seconds until the unit beeps. The incoming call will become active  
and the current call will be released.  
Volume  
To adjust the volume level, press JOG to the left to decrease volume or to the right  
to increase volume.  
Note: the volume can only be adjusted during a call.  
Mute  
To mute the microphone during a call, press in on JOG once. To turn off the mute  
function, press in on JOG one more time.  
Reset  
To reset the unit to its factory settings, press and hold  
seconds. "RESET" will appear in the display.  
for approximately eight  
Note: When the unit is reset, many user settings will be deleted, including paired  
device information, selected ring tone and incoming call list. No phone numbers  
will be deleted from the phone book when the unit is reset. Please refer to page 9  
for instructions for resetting the phone book.  
5
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
MenuꢀMode  
The following settings may be adjusted using menu mode:  
• Ring Tone  
• Phone Book  
• Hotline  
Note: Menu mode may only be accessed when the unit is not connected to a phone.  
To enter menu mode, press in and hold JOG for two seconds. "MENU MODE" will  
appear on the display.  
Press JOG to the right or left to scroll forward or backward through the three  
menu options (RING TONE, PHONE BOOK and HOTLINE). When the desired option  
appears in the display, press in on JOG to access that sub-menu.  
After making changes within a sub-menu, press in and hold JOG for two seconds  
to confirm. To return to the main menu from a sub-menu without saving changes,  
press  
one time. Press  
again to exit menu mode.  
RingꢀTone  
1. While in menu mode, press JOG to the right or left until "RING TONE"  
appears in the display.  
2. Press in on JOG to enter the Ring Tone sub-menu.  
3. Press JOG to the right or left to scroll through the following options:  
RING TONE 1, RING TONE 2 or RING TONE 3. The unit will play a sample of each  
ring tone as its name is displayed.  
4. Select the desired ring tone option, and press in and hold JOG for two  
seconds to confirm.  
5. The name of the ring tone selected will appear in the display.  
6. Press  
to exit the menu.  
6
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
MenuꢀModeꢀ(continued)  
PhoneꢀBook  
1. To manually input a phone book entry, enter menu mode, then press JOG to the  
right or left until “PHONE BOOK” appears in the display.  
2. Press in on JOG to enter the Phone Book sub-menu.  
3. "INSERT NUM." will appear briefly on the display, then a flashing cursor will  
prompt the entry of a phone number. Press JOG to the right or left to select the  
desired number for the first digit. Press in on JOG to confirm the selection, and  
move the cursor to the next digit. Repeat until the entire number has been  
entered, then press in and hold JOG for two seconds. "SAVED NUMBER" will  
appear in the display.  
Note: Press  
to backspace during number entry.  
4. After the phone number is saved, a flashing cursor will prompt the entry of  
a name. Press JOG to the right or left to select the desired first letter.  
Press in on JOG to confirm the selection and move the cursor to the  
next letter. Repeat until the entire name has been input, then press in and hold  
JOG for two seconds. "SAVED NAME" will appear in the display.  
Note: Press  
to backspace during name entry. To enter a space, press JOG to  
the left, then press it in briefly.  
5. Press  
to exit the menu.  
Hotline  
1. To program the Hotline speed dial button, enter menu mode, then press JOG to  
the right or left until "HOTLINE" appears in the display.  
2. Press in on JOG to enter the Hotline sub-menu.  
7
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
MenuꢀModeꢀ(continued)  
3. "INSERT NUM." will appear briefly on the display, then a flashing cursor will  
prompt the entry of a phone number. Press JOG to the right or left to select the  
desired number for the first digit. Press in on JOG to confirm the selection and  
move the cursor to the next digit. Repeat until the entire number has been  
entered, then press in and hold JOG for two seconds. "SAVED NUMBER" will  
appear in the display.  
Note: Press to backspace during number entry.  
4. Press to exit the menu.  
Note: The hotline number can be edited without entering menu mode by pressing H  
(the hotline button) for three seconds. The hotline number will appear in the display  
with the cursor flashing on the last digit. Press  
the right or left to edit any number as desired.  
to backspace, and press JOG to  
UsingꢀtheꢀPhoneꢀBook  
CallingꢀaꢀPhoneꢀBookꢀEntry  
1. Press JOG to the left. "SELECT LETTER" will briefly appear in the display,  
followed by "A".  
2. Press JOG to the right or left to scroll through the alphabet and select  
the first letter of the desired name. When the desired letter appears in the  
display, press in on JOG. "SEARCHING" will appear in the display.  
3. If the phone book contains an entry beginning with the selected letter, the name  
and number will appear on the display. Press JOG to the right or left to scroll  
through all phone book entries beginning with that letter.  
4. When the desired name appears in the display, press  
to connect the call.  
EditingꢀaꢀPhoneꢀBookꢀEntry  
Search for an entry as described in Calling a Phone Book Entry above. When the  
desired entry is displayed, press in on JOG. The cursor will flash on the last digit.  
Note: Press  
as desired.  
to backspace, and press JOG to the right or left to edit any number  
8
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
OPERATION  
UsingꢀtheꢀPhoneꢀBook  
DeletingꢀaꢀPhoneꢀBookꢀEntry  
Search for an entry as described in Calling a Phone Book Entry on page 8. When  
the desired entry is displayed, press  
for three seconds to delete.  
DownloadingꢀPhoneꢀBookꢀContacts  
Download individual contacts from any mobile phone that supports Object Push  
Profile. Contacts will be downloaded one at a time.  
1. Open the LCD flap while holding  
. "OBJECT PUSH" will appear in the display.  
2. Locate the desired number in the phone, and send it to the BTV30 using the  
method outlined in the phone's instruction manual.  
3. The display will show when the unit is "CONNECTED", "DOWNLOADING" and  
"COMPLETED". After the download, the unit will return to object push mode.  
4. Repeat steps 2 and 3 to add all desired phone book contacts.  
5. Close the LCD flap to turn the power off, then reopen and begin pairing.  
ResettingꢀtheꢀPhoneꢀBook  
Note: The phone book may only be reset when the unit is not paired to a phone.  
To reset the phone book, press and hold  
for approximately 15 seconds.  
"PHONEBOOK RESET" will appear in the display. The unit will begin resetting the  
phone book. "RESETTING" will appear in the display.  
Once the phone books is reset, the unit will perform a memory test, during which  
time "TESTING" will appear in the display. After the test in complete, the unit will be  
ready for use and "HELLO" will appear in the display. The reset process takes about  
2 1/2 minutes to complete.  
ChargingꢀtheꢀBattery  
Remove the unit from the visor to charge. Plug the car charger into the charging  
port on the unit, and connect the other end to the power supply.  
9
 
®
®
BTV30ꢀBLUETOOTHꢀꢀSPEAKERPHONE  
LIMITEDꢀONE-YEARꢀWARRANTY  
This warranty gives you specific legal rights.  
Whatꢀtoꢀdo?  
You may also have other rights which vary  
from state to state.  
1. Before you call for service, check the  
troubleshooting guide in your owner’s  
manual. A slight adjustment of any custom  
controls may save you a call.  
Dual Electronics Corp. warrants this product  
to the original purchaser to be free from  
defects in material and workmanship for  
a period of one year from the date of the  
original purchase.  
2. If you require service during the warranty  
period, you must carefully pack the product  
(preferably in the original package) and  
ship it by prepaid transportation with  
a copy of the original receipt from the  
retailer to an authorized service center.  
Dual Electronics Corp. agrees, at our option,  
during the warranty period, to repair any  
defect in material or workmanship or to  
furnish an equal new, renewed or comparable  
product (whichever is deemed necessary)  
in exchange without charges, subject to  
verification of the defect or malfunction and  
proof of the date of purchase. Subsequent  
replacement products are warranted for the  
balance of the original warranty period.  
3. Please describe your problem in writing  
and include your name, a return UPS  
shipping address (P.O. Box not acceptable),  
and a daytime phone number with your  
shipment.  
4. For more information and for the location  
of the nearest authorized service center  
please contact us by one of the following  
methods:  
Whoꢀisꢀcovered?ꢀThis warranty is extended  
to the original retail purchaser for products  
purchased and used in the U.S.A.  
• Call us toll-free at 1-866-382-5476  
• E-mail us at [email protected]  
Exclusion of Certain Damages: This warranty  
is exclusive and in lieu of any and all other  
warranties, expressed or implied, including  
without limitation the implied warranties of  
merchantability and fitness for a particular  
purpose and any obligation, liability,  
Whatꢀisꢀcovered?ꢀThis warranty covers all  
defects in material and workmanship in  
this product. The following are not covered:  
installation/removal costs, damage resulting  
from accident, misuse, abuse, neglect,  
product modification, improper installation,  
incorrect line voltage, unauthorized repair or  
failure to follow instructions supplied with the  
product, or damage occurring during return  
shipment of the product.  
right, claim or remedy in contract or tort,  
whether or not arising from the company’s  
negligence, actual or imputed. No person or  
representative is authorized to assume for the  
company any other liability in connection with  
the sale of this product. In no event shall the  
company be liable for indirect, incidental or  
consequential damages.  
10  
 
Dual Electronics Corp.  
Toll Free: 1-866-382-5476  
©2007 Dual Electronics Corp. All rights reserved.  
MagnetꢀWarning  
The BTV30 contains powerful magnets that may cause data loss  
when exposed to certain devices or credit cards.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-  
ditions: (1) This device may not cause harmful interference, and (2) This device must accept any  
interferences received, including interference that may cause undesired operations.  
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by  
Movon is under license. Other trademarks and trade names are those of their respective owners.  
NSA0407-V01  
 

Cisco Systems Network Router 1417 User Manual
Cooper Bussmann Surge Protector 6125TD User Manual
Craftsman Utility Trailer 12324201 User Manual
Crate Amplifiers Musical Instrument Amplifier MXB10 User Manual
Cypress Computer Hardware CY62158EV30 User Manual
Dynex Flat Panel Television DX LCD32 09 User Manual
Electro Voice Microphone 205C User Manual
Euro Pro Fryer F1400B User Manual
Everpure Water System 7CB5 K User Manual
Gigabyte Network Card GV 3D1 7950 RH User Manual