Dual Stereo System XDM6820 User Manual

XDM6820  
INSTALLATION/OWNERS MANUAL  
AM/FM/CD/MP3/WMA Receiver with Detach Face  
 
XDM6820 INSTALLATION  
Wiring Diagram  
FUSE  
When replacing the fuse,  
make sure new fuse is the  
correct type and amperage.  
Using an incorrect fuse  
could damage the radio.  
The XDM6820 uses one  
10 amp ATM fuse located  
beside the wiring connector.  
3
 
XDM6820 OPERATION  
Control Locations  
3
6
8
9
10  
1
2
4
5
7
22  
21 20 19  
18  
17  
16  
15  
14  
13 12 11  
Release  
Tuner Scan/8  
1
2
12  
13  
14  
15  
16  
17  
18  
Power  
Local/Distance/7  
Preset 6/Folder Up  
Preset 5/Folder Down  
Preset 4  
Volume  
3
Band/Play/Pause  
Mode/Search  
4
5
Auto Store/Preset Scan/Enter  
Tune/Track Down  
Eject  
Preset 3/Intro  
6
Preset 2/Random  
7
8
19 Preset 1/Repeat  
20 Audio  
9
Tune/Track Up  
Display/0  
10  
11  
21  
22  
Loudness  
Mute  
EQ/9  
The XDM6820 allows playback of your favorite MP3 and WMA files recorded on CD-R and  
CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while  
maintaining near-CD sound quality. An internal SRAM buffer provides ESP (Electronic  
Skip Protection) to virtually eliminate skipping and allows alphanumeric or direct track  
search - even while a song is currently playing!  
4
 
XDM6820 OPERATION  
General Operation  
Faceplate Removal Press RELEASE and pull away from the left side to remove.  
To re-install, insert right side of faceplate first then push  
left side to secure.  
Semi-permanent Remove trim ring and install supplied #1 x 7/32” Phillips  
Faceplate Installation head screw through left side of mounting frame into faceplate.  
Power On/Off Press POWER or any other button (except eject) to turn the  
unit on. Inserting a disc will turn the unit on automatically.  
Press POWER to turn the unit off.  
Mode Press MODE to select between tuner, CD player and auxiliary  
input. Modes of operation are indicated in the display.  
Loudness Press LOUD to activate and deactivate the loudness contour  
curve. Activating this feature will enhance the bass and  
treble frequencies when listening to music at low volumes.  
Volume Adjust volume using rotary encoder (00-46).  
Programmable Press and hold POWER for 3 seconds to program currently  
Turn-On Volume selected volume level. "P-VOL" and the current volume level  
will momentarily appear in the display.  
Preset EQ Curves Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK  
and OFF (default) equalization curves. Any adjustment to the  
Bass or Treble settings automatically cancels the current EQ  
curve (if one is selected).  
Display Press DISP to select between clock and radio frequency  
(tuner mode), clock and CD track/elapsed time (CD mode), or  
clock and AUX (AUX mode).  
Set the Clock With the unit on, press and hold DISP until the clock begins  
to flash, then release. Press TUNE  
to adjust the hours  
nn  
and TUNE  
to adjust the minutes. Press DISP  
ll  
momentarily to save the selected time.  
12/24-hour Clock The clock will display 12-hour AM/PM time in USA frequency  
:
spacing mode (PM 10 00). In European frequency spacing  
mode, the clock will display 24-hour time (22:00).  
5
 
XDM6820 OPERATION  
General Operation  
In tuner mode, press and hold DISP then press TUNE  
to select function priority display. "FREQ" will momentarily  
Programmable Display  
Priority  
ll  
appear in the display.  
Note:  
"FUNC" will appear in CD or AUX modes.  
Radio frequency (tuner mode), CD track/elapsed time (CD  
mode) or AUX (AUX mode) will be displayed by default.  
Note:  
When playing MP3/WMA files, the track number/elapsed  
time, track name, directory name, title, artist, album, year  
or comment will be displayed by default. Clock is accessed  
by pressing DISP momentarily.  
Press and hold DISP then press TUNE  
to select time  
nn  
display priority. "TIME" will momentarily appear in the  
display. Clock will be displayed by default. Radio frequency,  
CD track/elapsed time or MP3/WMA file information is  
accessed by pressing DISP momentarily.  
Programs unit to display clock/no clock when unit is off.  
Press and hold MODE then press PRESET 1 to select clock  
priority on/off. "CLK ON" or "CLK OFF" will momentarily  
appear in the display.  
Programmable Clock  
Priority  
Press and hold for more than 2 seconds to RESET the unit  
upon initial installation or if abnormal operation occurs.  
The reset button is located behind the faceplate.  
Reset  
Press and hold AUDIO for 3 seconds to turn confirmation  
beep on/off.  
Confirmation Beep  
Mute  
Press MUTE to silence the audio. "MUTE" will flash in the  
display. Press MUTE again to cancel.  
6
 
XDM6820 OPERATION  
General Operation  
Audio Press AUDIO to select between Volume (default), Bass,  
Treble, Balance & Fader.  
Bass Press AUDIO until BAS appears  
Rotate encoder left/right to adjust  
( -6 minimum / +6 maximum)  
Treble Press AUDIO until TRE appears  
Rotate encoder left/right to adjust  
( -6 minimum / +6 maximum)  
Balance Press AUDIO until BAL appears  
Rotate encoder left/right to adjust  
(BAL L 12-BAL 00-BAL R 12)  
BAL 00 represents equal balance  
Fader Press AUDIO until FAD appears  
Rotate encoder left/right to adjust  
(FAD F 12-FAD 00-FAD R 12)  
FAD 00 represents equal fader  
Source Audio Memory Individual Bass and Treble settings are retained in memory  
for AM, FM, CD, and AUX modes. This allows you to save  
the Bass and Treble settings separately for each mode.  
Example:  
FM tuner mode can have Bass +3 and Treble -1 while CD  
mode can have Bass +2 and Treble +2.  
Note:  
Any adjustment to the Bass or Treble settings automatically  
cancels the current EQ curve (if one is selected).  
7
 
XDM6820 OPERATION  
Tuner Operation  
Seek Tuning Press TUNE  
or TUNE  
next strong station.  
momentarily to seek the  
for more than 2 seconds,  
nn  
ll  
ll  
Manual Tuning Press TUNE  
or TUNE  
nn  
then release. "MANUAL" will momentarily appear in the  
display. Press TUNE  
or TUNE  
momentarily to  
nn  
ll  
move radio frequency up or down one step at a time. Press  
and hold to advance quickly. If tuning is not adjusted for 5  
seconds, the unit will return to seek tuning mode (default).  
"AUTO" will momentarily appear in the display.  
Scan Tuning Press SCAN to preview strong stations on the current band,  
pausing for 5 seconds at each. Press SCAN again to cancel.  
Local/Distance Press LOC to activate local tuning for strong station reception  
only. Press LOC again to cancel and resume Distance tuning  
(default).  
Band Press BAND to select between FM1, FM2, FM3, AM1 and AM2  
bands.  
Frequency Spacing Press and hold BAND then press TUNE  
to select  
nn  
European frequency spacing. Press and hold BAND then  
press TUNE to select USA frequency spacing (default).  
ll  
Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. To  
Station Presets store a station, select the desired band and station. Press  
and hold the desired preset button (1-6) for more than  
2 seconds. When stored, the preset number will appear in  
the display. The station can be recalled anytime by pressing  
the corresponding preset button.  
Note:  
Function buttons 7, 8, 9 and 0 apply to MP3 and WMA  
playback only.  
Press AS/PS for more than 2 seconds to automatically store  
the six strongest stations in the current band. Automatic  
Local/Distance is activated during the initial band scan.  
Automatically Store  
Stations  
Press AS/PS for less than 2 seconds to scan presets 1-6 on  
the current band, pausing for 5 seconds at each. Press  
AS/PS again to cancel.  
Preset Scan  
8
 
XDM6820 OPERATION  
CD Player Operation  
With the label facing up, insert a standard size CD into the  
CD slot. The CD will automatically begin playback.  
Insert CD  
Eject CD  
Press EJECT to eject the CD. The unit will change to previous  
mode of operation (AM, FM, or auxiliary input). If the disc is  
not removed within 10 seconds, the unit will reload the disc.  
The unit does not have to be turned on to eject CD.  
Press TRACK  
Press TRACK  
track. Pressing TRACK  
to skip to the beginning of the next track.  
to return to the beginning of the current  
Track Select  
ll  
nn  
again skips to the beginning of  
nn  
the previous track.  
Press and hold TRACK  
or reverse a track.  
or TRACK  
to fast forward  
Fast Forward and Reverse  
ll  
nn  
Press  
Press  
/
/
II to temporarily stop CD playback.  
II again to resume playback.  
Pause  
Intro  
l
l
Press INT to play the first 10 seconds of each track.  
Press INT again to cancel.  
Press RPT to continuously repeat selected track.  
Press RPT again to cancel.  
Repeat  
Random  
Press RDM to play all tracks in random order. Press RDM  
again to cancel. Random mode is retained in memory when  
selecting between tuner, CD player and auxiliary input  
modes and when the unit is turned on/off.  
Some CD-Rs and CD-RWs may be incompatible with this  
unit, depending on media type and recording method. In  
addition, the following CDs may be incompatible with this  
unit:  
CD-R/CD-RW Compatibility  
CDs exposed to extreme temperatures or direct sunlight for  
extended periods of time, CDs recorded in which a recording  
session failed or a re-recording was attempted and, or  
encrypted or copy-protected CDs which do not conform to  
the audio CD-DA red book recording standard.  
9
 
XDM6820 OPERATION  
CD Player Operation - MP3/WMA Files  
When an MP3/WMA encoded disc is first inserted,  
"READING" will appear in the display. Depending on the  
number of files and folders, this may take several seconds.  
Playing an MP3/WMA Disc  
The  
icon will illuminate anytime a valid MP3 encoded  
MP3 Icon  
WMA Icon  
disc is inserted and flash in MP3 search/navigate modes.  
The  
icon will illuminate anytime a valid WMA encoded  
disc is inserted and flash in WMA search/navigate modes.  
Folder Icon  
The  
icon will illuminate anytime a folder is selected in  
the file/folder search modes.  
Displaying Information  
Press DISP to select between track number/elapsed time  
(default), clock, track name, directory name, title, artist,  
album, year and comment.  
"NO ID3 TAG" will be displayed if the MP3 file contains no  
ID3 tag information.  
"UNKNOWN" will be displayed if the WMA file contains no  
WMA tag information.  
"ROOT" will be displayed if the directory name of a root  
folder is not labeled.  
Character Support  
Maximum character display information  
Track name – 32 character maximum  
• Directory name – 32 character maximum  
• *Song title – 30 character maximum  
• *Artist name – 30 character maximum  
• *Album name – 30 character maximum  
• *Year – 4 character maximum  
• *Comment – 28 character maximum  
*Song title, Artist Name, Album name, Year and Comment  
will only be displayed if included with the MP3/WMA file.  
When referring to MP3/WMA playback, the following terms  
are synonymous:  
• File name and track name  
• Folder name and directory name  
10  
 
XDM6820 OPERATION  
CD Player Operation - MP3/WMA Files  
Refer to the following button function table when selecting, searching or  
navigating MP3/WMA files and folders:  
MP3/WMA Button Function Table  
Button  
SEARCH  
ENTER  
Preset 1  
Preset 2  
Preset 3  
Preset 4  
Preset 5  
Preset 6  
7
Function  
Direct Select, Search and Navigate Modes  
Enter/Confirm  
A, B, C, 1  
D, E, F, 2  
G, H, I, 3  
J, K, L, 4  
M, N, O, 5  
P, Q, R, 6  
S, T, U, 7  
8
V, W, X, 8  
9
Y, Z, /, 9  
0
-, _, +, 0  
AUDIO  
Rotary Encoder  
MUTE  
Character Shift  
Character Select (A, B, C ~ 8, 9, 0)  
Character Backspace  
Direct Select, Search and  
Navigate Modes  
Press SEARCH for more than 3 seconds, to select between  
the following modes:  
• Direct File Select  
• Alphanumeric File or Folder Search  
• File or Folder Navigate  
Direct File Select  
Step 1  
Press SEARCH for more than 3 seconds, then release.  
"MP3 T " or "WMA T " will flash in the display. Use the  
*
*
buttons in the above table (3 keystroke maximum input),  
or the rotary encoder to enter the desired file number.  
Step 2  
Press ENTER to confirm the selected file number or wait for  
the input cycle to time out (approximately 5 seconds).  
If the file is not available, "NO FILE" will be displayed  
momentarily and the current file will continue to play.  
11  
 
XDM6820 OPERATION  
CD Player Operation - MP3/WMA Files  
Alphanumeric File Press SEARCH for more than 3 seconds, then release.  
or Folder Search Press SEARCH again, an " " will flash in the display. Use  
*
Step 1 the buttons in the table on page 11 (32 character maximum  
input) or the rotary encoder to enter the desired alphanu-  
meric search characters. Press AUDIO to advance one  
character to the right.  
Step 2 Press ENTER to initiate the selected alphanumeric search.  
Step 3 Turn the rotary encoder to preview the search results.  
If the search returns a folder, the  
icon will illuminate.  
Step 4 Press ENTER to select the desired file or folder. If a folder  
is selected, "/ /" will be displayed. Turn the rotary encoder to  
the right to begin searching files in the folder.  
Step 5 Press ENTER to select the desired file within the folder.  
Note:  
If the file is not available, "NO FILE" will be displayed  
momentarily and the current file will continue to play.  
File/Folder Navigate Press SEARCH for more than 3 seconds, then release.  
Step 1 Press SEARCH again two times to navigate files/folders  
on the disc. The current folder name will scroll one time  
followed by available files and folders.  
Step 2 Turn the rotary encoder to preview files/folders in the  
current folder. If a folder is selected, the  
illuminate.  
icon will  
Step 3 Press ENTER to select the desired file or folder. If a folder  
is selected, "/ / " will be displayed. Turn the rotary encoder  
to the right to begin searching files in the folder.  
Step 4 Press ENTER to select the desired file within the folder.  
*Folder Access When navigating folders (and "/ / " is displayed), press  
(Up one level) AUDIO to access the previous level (up one level).  
*Only available on MP3/WMA discs recorded with more  
than one folder.  
12  
 
XDM6820 OPERATION  
CD Player Operation - MP3/WMA Files  
After navigating by direct select, alphanumeric search or  
file/folder navigate modes, the track number and elapsed  
time will be displayed by default. Press DISP momentarily to  
select clock, track name, directory name, title, artist, album,  
year or comment.  
Navigating Note  
*Folder Access  
File Repeat  
Press F  
Press F  
to select the previous folder.  
to select the next folder.  
*Folder access is only available on MP3/WMA discs recorded  
with more than one folder.  
Press RPT momentarily to continuously repeat selected file.  
Press RPT again to cancel.  
Press RPT for more than 2 seconds to consecutively repeat  
File Repeat  
all files in the current folder only. The  
the display when in folder repeat mode.  
Press RPT again to cancel.  
icon will appear in  
(Current Folder Only)  
Press RDM momentarily to play all files on entire disc in  
random order. Press RDM again to cancel.  
Disc Random  
Press RDM for more than 2 seconds to play all files in  
Folder Random  
current folder only in random order. The  
in the display when in folder random mode.  
Press RDM again to cancel.  
icon will appear  
Press INT momentarily to play the first 10 seconds of each  
file on the entire MP3/WMA disc. Press INT again to cancel.  
Disc Intro  
Press INT for more than 2 seconds to play the first 10  
Folder Intro  
seconds of each file in the current folder only. The  
will appear in the display when in folder intro mode.  
Press INT again to cancel.  
icon  
Note:  
File repeat (current folder only), folder random and folder  
intro is only available on MP3/WMA discs recorded with  
more than one folder.  
13  
 
XDM6820 OPERATION  
CD Player Operation - MP3/WMA Files  
The following types of discs/files are compatible:  
Media Compatibility  
• CD-ROM (ISO), CD-R, CD-RW  
• CD-DA  
• MP3 data  
• WMA data  
The following types of discs/files are not compatible:  
• WMA files that are protected by DRM (Digital Rights  
Management).  
• WMA lossless format  
• Discs recorded with Track At Once or packet writing  
• MP3 PRO format  
• MP3 playlists  
• WAV format  
MP3/WMA playback sequence is based on recorded order of  
files and begins in the root folder of the disc. Any empty  
folders or folders that do not include MP3/WMA files are  
skipped. This unit may not play files in the order they were  
recorded in. Refer to your recording software’s user’s manual  
for more information.  
Playback Order  
• ISO9660 level 1  
• ISO9660 level 2  
Compatible Recording  
Formats  
• Yellow Book MODE 1  
• Yellow Book MODE 2 FORM 1  
• Multi session  
• Maximum folders and files - 256  
• Maximum folder levels - 8  
• MPEG-1/2/2.5 Audio Layer-3  
ISO9660 standards:  
• Maximum nested folder depth is 8 (including the root folder).  
• Valid characters for folder/file names are letters A-Z  
(all caps), numbers 0-9, and “_” (underscore). Some  
characters may not be displayed correctly, depending on  
the character type.  
• This device can play back discs in Joliet, Romeo, and other  
standards that conform to ISO9660. MP3/WMA written in the  
formats other than the above may not play and/or their file  
names or folder names may not be displayed properly.  
14  
 
XDM6820 OPERATION  
CD Player Operation - MP3/WMA Files  
An internal buffer provides ESP (Electronic Skip Protection)  
to virtually eliminate skipping.  
Additional MP3/WMA  
Information  
When playing a disc recorded with regular audio files  
(CD-DA or .WAV) and MP3/WMA files, the unit will play the  
MP3/WMA files only.  
Only MP3 files with filename extension (.mp3) can be played.  
Only WMA files with filename extension (.wma) can be played.  
Do not attempt to play discs which contain non-MP3/WMA  
files with the MP3/WMA extension.  
Sampling Frequency Rates  
MP3  
8kHz ~ 48kHz  
32kHz ~ 48kHz  
WMA  
Transfer Bit rates  
MP3  
8kbps ~ 320kbps constant  
Variable bit rates  
32kbps ~ 192 kbps constant  
Variable bit rates  
WMA  
Note:  
Some files may not play or be displayed correctly,  
depending on sampling rates and bit rates.  
ID3 tags Version 1.x  
MP3 Tag Display  
This model will not display ID3 Version 2.0 or greater tags.  
For best results, use the following settings when burning an  
MP3 disc:  
Recommended Settings  
128kbps or higher constant bit rate  
44.1kHz or higher sampling frequency  
For best results, use the following settings when burning a  
WMA disc:  
64kbps or higher constant bit rate  
32kHz or higher sampling frequency  
15  
 
XDM6820 WARRANTY  
Limited One-Year Warranty  
This warranty gives you specific legal rights. You may  
also have other rights which vary from state to state.  
What to do?  
If purchased within the USA:  
1. Before you call for service, check your  
operating instruction booklet. A slight adjustment  
of any custom controls discussed in your  
instruction booklet may save you a service call.  
Dual Electronics Corp. warrants this product to the  
original purchaser to be free from defects in material  
and workmanship, under normal conditions, for a  
period of one year from the date of the original  
purchase.  
2. If you require service during the warranty  
period, you must carefully pack the product  
(preferably in the original package) and ship it by  
prepaid transportation with proof of the purchase  
date from the retailer to the Return Center  
address listed below.  
Dual Electronics Corp. agrees, at our option, during  
the warranty period, to repair any defect in material  
or workmanship or to furnish an equal new or  
renewed product in exchange without charges,  
subject to verification of the defect or malfunction and  
proof of the date of purchase.  
3. Please describe your problem in writing and  
include your name, a return UPS shipping  
address (P.O. Box not acceptable), and a daytime  
phone number with your shipment.  
During the One-Year Warranty Period: For One Year  
from the date of purchase, your product will be  
replaced with a new, renewed or comparable product  
(whichever is deemed necessary) if it becomes  
defective or inoperative. This is done without charge  
to you. Replacement products are warranted for the  
balance of the original warranty period.  
4. DUAL will pay the return shipping charges if  
the product is returned to an address within the  
48 contiguous states.  
Dual Electronics Corp.  
Attn: Returns Center  
21318 64th Ave. South  
Kent, WA 98032 U.S.A.  
Toll Free: 1-866-626-7863  
Who is covered? This warranty is extended to the  
original retail purchaser for products purchased and  
used in the U.S.A.  
What is covered? This warranty covers all defects in  
material and workmanship in this product. The  
following are not covered: installation/removal costs,  
damage resulting from accident, misuse, abuse,  
neglect, product modification, improper installation,  
incorrect line voltage, unauthorized repair or failure to  
follow instructions supplied with the product, or  
damage occurring during return shipment of the  
product.  
If purchased outside the USA:  
Please return the unit to original place of purchase  
for warranty service.  
Exclusion of Certain Damages: This warranty is  
exclusive and in lieu of any and all other warranties,  
expressed or implied, including without limitation the  
implied warranties of merchantability and fitness for  
a particular purpose and any obligation, liability, right,  
claim or remedy in contract or tort, whether or not  
arising from the company’s negligence, actual or  
imputed. No person or representative is authorized to  
assume for the company any other liability in  
connection with the sale of this product. In no event  
shall the company be liable for indirect, incidental or  
consequential damages.  
16  
 
XDM6820 OPERATION  
Specifications  
CD Player Signal-to-noise: >92dB  
Frequency response: 10Hz-20kHz  
Channel separation @ 1kHz: >65dB  
D/A converter: 1 Bit  
FM Tuner Tuning range: 87.5MHz-107.9MHz  
Usable sensitivity: 8.5dBf  
50dB quieting sensitivity: 10dBf  
Stereo separation @ 1kHz: 40dB  
Frequency response: 30Hz-13kHz  
AM Tuner Tuning range: 530kHz-1710kHz  
Usable sensitivity: 22uV  
Frequency response: 30Hz-2.2kHz  
General Total power output: 200 Watts Peak  
Power output: 50Wx4 @ 4 ohms, 14.4 VDC  
Operating voltage: 11-16 VDC, negative ground  
Speaker output impedance: 4~8 ohms  
Line output voltage: 2 Volts  
Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)  
Design and specifications subject to change without notice.  
17  
 
XDM6820 WARRANTY  
Troubleshooting  
Problem  
Cause  
Action  
Yellow wire not connected or incorrect voltage Check connections for proper voltage  
Unit will not turn on  
(no power)  
Red wire not connected or incorrect voltage  
Black wire not connected  
Fuse blown  
(11~16VDC)  
Check connection to ground  
Replace fuse  
Speaker wires not connected  
Check connections at speakers  
Unit has power  
(but no sound)  
One or more speaker wires touching each  
other or touching chassis ground  
Insulate all bare speaker wires from  
each other and chassis ground  
Yellow or red wire touching chassis ground  
Speaker wires touching chassis ground  
Incorrect fuse rating  
Check for pinched wire  
Check for pinched wire  
Use fuse with correct rating  
Unit blows fuses  
Unit is not mounted correctly or backstrap is Check mounting sleeve and backstrap  
not secure support  
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches  
Excessive skipping  
Disc read error  
Press eject or RESET  
Press eject or RESET  
Press eject or RESET  
Press eject or RESET  
ERROR-01 appears  
on display  
Focus error or disc is in upside down  
FAT error  
ERROR-02 appears  
on display  
ERROR-03 appears  
on display  
MP3/WMA decode error  
ERROR-04 appears  
on display  
The WMA file is copy-protected by DRM  
(Digital Rights Management)  
Write disc using WMA files that are not  
copy-protected  
PROTECT appears  
on display  
Selected file is not available in direct or  
alphanumeric search modes  
Repeat search using valid parameters  
NO FILE appears  
on display  
The file format is not compatible  
CD mechanism position out of alignment  
CD transit screws still in place  
Write disc using valid audio files with  
.mp3 or .wma file extensions  
INVALID appears  
on display  
Press EJECT for 3 seconds to reset  
CD mechanism position  
Remove 2 transit screws located on top  
of the unit  
Unit will not accept  
a disc  
18  
 
XDM6820 OPERATION  
Notes  
19  
 
Dual Electronics Corp.  
21318 64th Ave. South  
Kent, WA 98032  
Toll Free: 1-866-626-7863  
©2005 Dual Electronics Corp. All rights reserved.  
Windows Media and the Windows logo are trademarks, or  
registered trademarks of Microsoft Corporation in the United  
States and or other countries.  
NSA0205-V02  
 

Craftsman Cordless Drill 973111291 User Manual
Cuisinart Griddle GC 17 User Manual
Cuisinart Toaster TOB 50BC User Manual
Curtis Satellite TV System ATS111 User Manual
Delta Electronics Network Card SPBD 155E4J1RT User Manual
DigiTech Guitar EX 7 User Manual
Dimension One Spas Hot Tub Venture User Manual
GE Cordless Telephone 29111 User Manual
GE Monogram Ventilation Hood ZXR7510 User Manual
GE VCR VG4256 User Manual